Fire Inspector 2 Study Guide

Fire Inspector 2 Study Guide A code is: - A legal requirement of a building feature or operating feature at a certain location A standard is: - A set of specifications or requirements that is considered industry best practice and meets a minimum level of performance guidelines The most important tool the fire inspector possesses is: - Knowledge Any non-compliance (code violation) that has been noticed during the fire inspection: - Must be documented in the written report of the inspection One of the things that a Fire Inspector II could be expected to do that a Fire Inspector I would not, is to: - Process a permit application A permit to use a chemical during a manufacturing process is an example of a(n): - Hazardous materials use permit Which of the following individuals may have full police powers to investigate and arrest suspected arsonist and people causing false alarms? - Fire investigator To ensure that an installation or construction is safe to be occupied, a fire inspector uses: - Both prescriptive code and performance-based code The International Code Council is an example of a(n): - Model code organization The principles that a fire inspector should follow during an inspection are dictated by: - Ethics In the process of adopting a new or modified code or standard, the correct sequence of steps would be: - Identification of need, Review by elected officials, public hearing, adoption of code into statute Which of the following positions describes a fire inspector who works within a fire department and who may respond to the fire scenes for investigative purposes? - Fire Marshal Type II building is: - Same as Type I but with less fire resistance Dry wall is considered: - Limited-Combustible Masonry exterior bearing walls are usually found in: - Type III and IV construction What can be said about steel members? - They can melt in a severe fire Part of the building's weight and the building's content are supported by a: - Load-bearing wall The most fire-resistive category of building construction is: - Type I Annealed glass is known as: - Single-pane glass The most common building material is: - Wood Pyrolysis refers to: - Decomposition without combustion The most common type of construction used today is: - Type V Which of the following statements is true about gypsum board? - It is a good insulator and noncombustible Trusses are used: - For both floors and roofs In Type III (ordinary) construction, the fuel load in a fire is the: - Combustible building materials and contents of the building A barn used to shelter animals would be considered a(n): - Storage occupancy Personal care services are provided in a(n): - Residential board and care occupancy Possible panic hazard in the event of emergency must be considered when inspecting a(n): - Assembly occupancy Open structures, piers, vehicles, and