BICSI - Installer 1 – Exam Review Questions with 100 Correct and verified Answers . A+ GRADE.

B A third 90-degree bend may be permi4ed in a conduit run if the run does NOT exceed ______? A 5 m (16.5') B 10 m (33') C 15 m (50') D 30 m (100') C Which of the following is a property of an electromagneMc field built around a conductor that opposes any changes in current flow in a circuit? A Impedance B Capacitance C Inductance D Resistance A Which of the following markings is used for non-conducMve opMcal fiber generalpurpose cables? A OFNG B OFCR C OFCP D OFNP A Which of the following refers to a set of rules issued by a governmental body at the state level within the US? A RegulaMons B Best PracMces C ApplicaMons D Guidelines B What is the specified performance level for Category 6 cable? A 100 MHz B 250 MHz C 500 MHz D 600 MHz A Which type of opMcal fiber cable should be color coded with an Orange outer cable sheath? A MM with a 100 um core diameter B Dispersion-shi]ed SM opMcal fiber C PolarizaMon maintain SM opMcal fiber D SM opMcal fiber D Which of the following is the primary benefit of using wall-mounted racks and cabinets in place of tradiMonal equipment racks? A Provides equipment with a higher level of protecMon B Allows for the equipment to be easily rearranged C OpMmizes airflow within the equipment room D Takes up less space within the equipment room C Which topology uses a linear configuraMon that places all network devices on one length of cable? A Star B Ring C Bus D Which of the Two organizaMons jointly oversee the worldwide standardizaMon of telecommunicaMons cabling? A Alliance for TelecommunicaMons Industry SoluMons (ATIS) and Society for Cable TelecommunicaMons Engineers (SCTE) B NaMonal Electrical Contractors AssociaMon (NECA) and NaMonal Fire ProtecMon AssociaMon (NFPA) C Comite Europeen de NormalisaMon Electrotechnique (CENELEC) and Electronic Industries AssociaMon (EIA) D InternaMonal OrganizaMon for StandardizaMon (ISO) and InternaMonal Electrotechnical Commission (IEC) B Which of the following is designed to provide protecMon from harmful chemicals? A Cut-resistant gloves B Rubber gloves C Leather gloves B Which of the following is a building-serving space that houses large pieces of common acMve equipment? A TR B ER C TE D Mechanical Room E Ba4ery room C Which phase of tesMng includes documenMng the test results? A Phase 1 B Phase 2 C Phase 3 A Which of the following are typically used to support cables between a cable tray and work area outlets? A J-Hook B Innerduct C Pipe hanger D Trapeze B Which of the following PPE items MUST be worn at all Mmes when you are working with or handling OF? A Fall ProtecMon B Eye ProtecMon C Hearing ProtecMon D Breathing ProtecMon B Which of the following is used to equalize potenMal differences between the SBB on the same floor? A TBB B BBC C RBB D TEBC