Oregon Tattoo Practice Exam with Correct Solutions 2024

Oregon Tattoo Practice Exam with Correct Solutions abbreviation for armature bar - Answer -a-bar armature bar and rear coil should be ____________ - Answer -aligned an a-bar extending past rear coil creates _________ - Answer -more leverage usually a longer armature bar is a range from _.___ to _.____ - Answer -1.5-1.625 armature bars should be _________ ________, _____ ____________ - Answer -plain steel, no chrome when a-bar is flat on coil, rear coil has between .___-.___ - Answer -.010-.012 what can cause a rattle or deflection of a-bar? (4 things) - Answer -dust, lint, debris, hitting at an angle coils with too much core showing tend to ____ _____ - Answer -run hot do not allow the front spring to hang over the rear of the armature bar because it can create a ______ or ___________ - Answer -buzz or rattle there should be no sharp edges on __________ _______, should be rounded and very smooth - Answer - contact screws a short front spring will be _________ - Answer -faster all metals are measured on the _________ _______ - Answer -rockwell scale best on the scale for spring stock is ___-___ - Answer -48-51 can be used to clean your contact area and screws and spring - Answer -alcohol thin, cheap binding posts cause ________ - Answer -rattle _____________ is a key factor when it comes to a-bar choice - Answer -leverage copper is ___% conductive - Answer -100 brass is a mixture of - Answer -copper and zinc some machines have _-__ threaded machine screws and some have _-__ - Answer -6-32, 8-32 _________ __________ ______ help dampen vibrations - Answer -thicker binding posts is a shorter or longer front spring better on a liner? - Answer -shorter screw insulators commonly known as __________ __________ , most common are made of fiber and p