HIC Exam Questions and Answers 100% Correct

To avoid hardening due to hydration ....use masonry mo before? - ANSWER-2 1/2 Hours Heat flows in what direction ? - ANSWER-Hot to Cold First and most important step in using or preparing a material ? - ANSWER-Thoroughly read and understand the manufactures directions . whats true abou the gypsum broads over wood framing ? - ANSWER-Apply First to ceiling , then to wall What is used to remove air pockets from place concrete ? - ANSWER-Vibration wide square-edged boards are to be used for broad and batt siding . how should the batten strips be nailed ? - ANSWER-to the furring strips between the boards . what can be installed on a vertical wall to accept viny soppit panels ? - ANSWER-F-Channel a vapor retarder on blanket insulation - ANSWER-Face the warm side of wall when installing shoe molding on a base board over hand wood floor , the shoe mold should be ? - ANSWER-nailed only to the base board to facilitate handling + workability ... must speak jobsite addition of water to the concrete mixture - ANSWER-maintain the slump, without exceeding the allow water - cement ratio . Actual standard size of a concrete block ? - ANSWER-7 5/8 x 7 5/8 x 15 5/8 Maximum threshold height of egress door , of group occupancy building ? - ANSWER-1/2 inch First leveling procedure after pouring concrete ? - ANSWER-screeding timing for floating+ trouling is critical inproduce - ANSWER-a smooth durable surface when applying a run of wall cabinets , the cabinets should be? - ANSWER-fitted with a hanger rail