Vivint Smart Home Pro Final Exam Questions With Complete Solutions

Vivint Smart Home Pro Final Exam Questions With Complete Solutions What is the input voltage range of the Doorbell Cam? Correct Ans-12-24v What is the output voltage of the transformer used to power the SkyControl panel? Correct Ans-16.5 VAC True or False: When programming a sensor into the sky panel you can type in the serial number or "learn" it in by triggering the device Correct Ans-true When programming a DW21, which loop number is used? 1 2 3 Correct Ans-2 Which of the following materials can you use to group multiple ground terminals in a takeover module: Solder String Wire Caps Duct Tape Beans Correct Ans-beans and wire caps T or F: When installing the firefighter, it is required to test the customer's existing smoke detectors Correct Ans-True When installing a DW21, what size bit should you use to drill the hole for the sensor? 1/2" 3/8" 3/4" 1" Correct Ans-3/4" T or F: When installing the TAKE-345, you must ensure that the transformer is supplying power to the power supply before the battery. Correct Ans-True T or F: You are required to test signals from all secondary keypads and key fobs even though they are not detection devices Correct Ans-True T or F: When running power to the TAKE-345 polarity does not apply Correct Ans-False What is the correct height at which to install the PIR2? 7 ft At least 5 ft At least 7 ft At 7.5 ft Correct Ans- Correct Ans-How would you program a CO3 if mounted on a hallway wall? Loop 1 Zone 8 Loop 1 Zone 14 Loop 3 Zone 4 Loop 1 Zone 4 Correct Ans-When installing a DW21 into a metal door frame, with a wooden door, what should you be sure to use? Metal Drill bit A DW11 should be used on all metal door frames 3/4" insulated magnet Eye goggles