Texas State Inspector Safety Cert Questions and Answers 100% Pass
Texas State Inspector Safety Cert Questions and Answers 100% Pass One of the required procedures in the inspection of the steering is: Turning the steering wheel from full left to full right Conventional brakes or non-power brakes must have a minimum pedal reserve of: 2 inch Any tire with wear bar indicators would be rejected for the following reason: Tread wear indicators contact the road on any two adjacent major grooves in the center of the middle of the tire LED tail lamps may have no more than ______ of diodes malfunctioning to pass inspection. 50% When performing a road test on the service brakes, a truck weighing over 10,000 lbs GVW (this would include larger trucks but not truck-trailer combinations) should be driven at a speed of 20 mph and should stop within: 40 feet The vehicle owner/operator should be present when the inspector is checking CNG tank located in the trunk of the car. True Glass coating or sun screening materials on windshield may not extend down past the AS-1 line or more than ____ inches, whichever is closer to the top of the windshield: 5 inches Brakes would be rejected if: There is obvious metal to metal contact when brakes are applied. When issuing a Vehicle Inspection Report to a vehicle, the VIN will be taken from the: Vehicle Proof of financial responsibility is not required on motor vehicles prior to the model year 1988. False When is a vehicle required to be inspected for seat belts? Anchorages were part of the manufactures original equipment The turn signal selector switch must lock in the proper position when applied on: All vehicles A truck or trailer is required to have clearance lamps and side marker lamps if the total width of the vehicle is: 80 inches or more In order to pass inspection, tires must have a tread depth of at least ___ in the two center adjacent major grooves. 2/32 inch A parking brake is required to be inspected on all cars and trucks beginning with the model year: 1960 The exhaust system includes the following:
Written for
- Institution
- Texas State Inspector Safety Cert
- Course
- Texas State Inspector Safety Cert
Document information
- Uploaded on
- March 22, 2024
- Number of pages
- 8
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers
Subjects
-
texas state inspector safety cert questions and an
Also available in package deal