Mk1 swe

what are two types of maintenance - Answer-Corrective and preventative What article always captain to conduct NJP - Answer-Article 15 Where two types of procedures that may be accessed from maintenance procedure option - Answer-Official and local Who is authorized to conduct tag outs - Answer-Authorizing officer Out of calibration tags should be used when - Answer-When indicating parameter errors are small and consistent For modernized units the boat inspection reports are to be entered through - Answer-Almis/ EALpage Cutter engineering report shall be completed in accordance with - Answer-Naval engineering manual chapter 90 On an MPC the warning shall come where in the text - Answer-Before the instruction On an MPC what would constitute an expendable - Answer-Rags PMS that does not need to be included in the cutter engineering report is - Answer-Daily and weekly With regards to casreps what is mandatory on all updates corrects and cancellations - AnswerREF Which unit besides a shore unit are exempt from filling out the POSIT line - Answer-Cutter underway A casrep it should be made as soon as possible no later than ____hours - Answer-24 Casualties that effect a secondary mission should always have a casualty category of - Answer-2 AMPN is mandatory after any set that contains an entry of? - Answer-Other, tech, none In a 1PARTSID if the NIIN is not known what needs to be put in the line - Answer-Unknown What is the criteria for submitting CASCOR - Answer-The delay expressed an hours, and correcting the casualty due to parts unavailability, a list of all parts requested and dates received; the total number of man-hours expanded; the number of equipment hours since last failure