Pro Tools Tier 4 Post

Pro Tools Tier 4 Post What 4 pieces of AVID hardware are needed for a satellite? - - Pro Tools HD rig - AVID sync HD interface - Video monitors - Another Pro Tools system What 3 physical connections are needed for a satellite? - - CAT5 or CAT6 cable with an RJ-45 connection - Blackburst or tri-level sync connection - A video connection (HDMI, Composite, etc) What kind of cable and wiring is needed for a computer connecting through a router or switch to another computer? - CAT5 or CAT6, Straight-through What is needed to send video to TV monitors in the studio or control room? - An HDMI splitter What 4 things should all Pro Tools rigs share? - - Same timecode frame rate - Same format (PAL, NTSC...) - Correct clock and source settings (blackburst or trilevel sync) - The same network What should the subnet mask be set to for all connected Pro Tools rigs? - 255.255.0.0 Class B Where would you access the internet settings on all Pro Tools rigs? - Apple System Preferences Network Ethernet What should each Pro Tools system IP address be set to? - First two octets should match, but last two should be unique All Pro Tools rigs should be on the ______ network - Same network! What 3 Settings Must Be Selected When Importing Audio from an AAF in "Import Session Data?" - - Force to target session format - Import - replacing existing playlists - Import - all track data What is the name for blackburst in the clock reference? - Video Reference (SD) What is blackburst? - A standard definition video reference What is tri-level sync? - A high definition video reference Where do you go for clocking and timecode settings in Pro Tools? - Setup Session How many Pro Tools systems can you sync? - 1 master device and 11 slave devices What is the quick key to trim the excess front and end of the clip? - Command T How do you scroll to the position of spotted audio? - Press the right or left arrow keys BEFORE clicking anything else Where do you change satellite settings in Pro Tools? - Setup Peripherals Satellite What are the 3 settings for a satellite? - - Enable Satellite Mode (Under "Mode") - Name it - Choose IP address What are the 5 settings for the Main Pro Tools rig? - - Name it - Choose IP address - Choose Administrator (Under "Mode") - Add the Main Rig (In Admin System 1) - Add all other systems