Study Guide To FOA Certification Exam Questions and Answers 100% Pass

Study Guide To FOA Certification Exam Questions and Answers 100% Pass Which fiber optic connector may be used according to the EIA/TIA 568 cabling standard? - Answer- Any connector with a FOCIS standards document What UTP Cat 3, Cat 5e, and Cat 6 or Class D, E, and F rating indicate? - Answer- The Performance level of unshielded twisted pair cable Commerical phone systems (not VoIP but POTS) traditionally use multipair UTP cables for backbone connections with _running_____used in the telecom closet for connections to horizontal cables running to the desktop. - Answer- 66 Punchdown blocks TIA Cat 5e or "enhanced Cat 5' cable or ISO/IEC Class D cable was introduced to support the needs of what the computer network? - Answer- Gigabet Ethernet For certifying Cat 5e/Class D Performance, installed cables are tested at ________. - Answer- 100 MHz Category 6/Class E cabling is specified and must be tested during certification to _______MHz. - Answer- 250 MHz A copper time domain reflectometer (TDR) can be used to find_________. - Answer- All of these When terminating Cat5e/6 or Class D/E UTP cabling, what must be remembered to maintain the performance of the installed cable? - Answer- Keep the pairs twisted to within 1/2 inch of the termination Which punchdown block is more often used with multipair cables for POTS (plain old telephone service) connections? - Answer- Bix block Standards are written by manufacturers as minimum specifications to ensure interoperability among various manufacturer's products. - Answer- True While video surveillance systems traditionally used coax cable, they can use UTP in a structured cabling system or fiber optics also. - Answer- True Gigabit and faster networks only work fiber optics. - Answer- False Fiber optic installations do not require inspection for compliance to local building or electrical codes since they do not contain copper wires. - Answer- False The US National Electrical Code (NEC) requires removal of all "abandoned" communications cabling for fire safety. - Answer- True The international standards include a Class F cable for highest performance networks that some manufacturers sell in the US as Category 7, but it is not currently a US standard. - Answer- True The name for the current generation UTP cable for use with 10 Gigabit network is _______. - Answer- Cat 7 Voice grade unshielded twisted pair cables (UTP) which are only intended to carry POTS (plain old telephone service) only need testing for_________. - Answer- Wiremap Below is the color code _________