Dell Client Advanced Study Guide with
Complete Solutions 2024.
The Edge Gateway 3000 series support the following power sources:
3-pin DC - In
Power over Ethernet (PoE 37V DC-57VDC)
Select the statements that are true about Trusted Platform Module (TPM)
The Trusted Platform Module (TPM) is used to generate and store Keys.
It can create and store digital certificates.
It can also be used to enable the BitLocker hard drive encryption.
The OEM identity (ID) Module is a Utility used to replace the Dell Logo on the System Hardware like
the Bezel.
False
When the side cover of Precision Tower 7920 is not assembled, the system will still power on.
False
ePSA stands for
Enhanced Pre-boot System Assessment
Which RAID is defined as Striped set without Parity?
RAID 0
In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM)
together with the processor. There is no need to seperate the PHM from the processor.
True
What steps must be taken if there is a fan-related error message displayed at the Start up but the
system boots to the OS?
Update BIOS and Drivers
Swapping the DIMMS
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider
must select the manageability option upon first boot after replacement.
True
We Import a Foreign configuration in a RAID Array, if:
, The array containing the foreign configuration is in an Offline state.
Which indicator shows whether power is present or power fault has occurred in Precision systems?
Both
Where can the field Service Manual containing Critical Callout, Disassembly and Reassembly
instructions be found?
PRM/ Educate Dell
The touchscreen LCD assembly for Alienware 13R3 is a Hinge-Up Design (HUD) assembly and cannot
be further disassembled once it is removed from the chassis
True
iDRAC with Lifecycle Controller can be used for
....
In the latest Precision Rack, the iDRAC Enterprise license is available by default
False
USB Service Key is used for Windows OS Installation and debranding (for OEM) in an Edge Gateway
True
Select all the LED codes for Memory related issues in a Dell Edge Gateway
2,3
2,4
2,5
On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off;
this indicates the drive is rebuilding
False
A CAN (Controller Area Network) bus is a vehicle bus standard designed to allow micro controllers and
devices to communicate with each other in applications without a host computer.
True
In a PERC H730P controller, P stands for Performance
True
DPK stands for
Digital Product Key
After completing a service incident on a Precision Tower 7920, technician attempts to run ePSA before
re-assembling the side cover. However, system is not able to power on and displays LED error code of
4-7. What could be the issue?
Complete Solutions 2024.
The Edge Gateway 3000 series support the following power sources:
3-pin DC - In
Power over Ethernet (PoE 37V DC-57VDC)
Select the statements that are true about Trusted Platform Module (TPM)
The Trusted Platform Module (TPM) is used to generate and store Keys.
It can create and store digital certificates.
It can also be used to enable the BitLocker hard drive encryption.
The OEM identity (ID) Module is a Utility used to replace the Dell Logo on the System Hardware like
the Bezel.
False
When the side cover of Precision Tower 7920 is not assembled, the system will still power on.
False
ePSA stands for
Enhanced Pre-boot System Assessment
Which RAID is defined as Striped set without Parity?
RAID 0
In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM)
together with the processor. There is no need to seperate the PHM from the processor.
True
What steps must be taken if there is a fan-related error message displayed at the Start up but the
system boots to the OS?
Update BIOS and Drivers
Swapping the DIMMS
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider
must select the manageability option upon first boot after replacement.
True
We Import a Foreign configuration in a RAID Array, if:
, The array containing the foreign configuration is in an Offline state.
Which indicator shows whether power is present or power fault has occurred in Precision systems?
Both
Where can the field Service Manual containing Critical Callout, Disassembly and Reassembly
instructions be found?
PRM/ Educate Dell
The touchscreen LCD assembly for Alienware 13R3 is a Hinge-Up Design (HUD) assembly and cannot
be further disassembled once it is removed from the chassis
True
iDRAC with Lifecycle Controller can be used for
....
In the latest Precision Rack, the iDRAC Enterprise license is available by default
False
USB Service Key is used for Windows OS Installation and debranding (for OEM) in an Edge Gateway
True
Select all the LED codes for Memory related issues in a Dell Edge Gateway
2,3
2,4
2,5
On a Precision Workstation, if a Hard drive status indicator flashes green, amber and then turns off;
this indicates the drive is rebuilding
False
A CAN (Controller Area Network) bus is a vehicle bus standard designed to allow micro controllers and
devices to communicate with each other in applications without a host computer.
True
In a PERC H730P controller, P stands for Performance
True
DPK stands for
Digital Product Key
After completing a service incident on a Precision Tower 7920, technician attempts to run ePSA before
re-assembling the side cover. However, system is not able to power on and displays LED error code of
4-7. What could be the issue?
