Dell Client Foundations Exam Questions
With 100% Correct Answers 2024.
NIC Activity LED is off and Link indicator is green. This indicates NIC is connected to a valid network at
its maximum port speed but data isn't being sent/received
True
When the side cover of Precision Tower 7920 is not assembled, the system will still power on.
False
The BIOS can be accessed in a Dell System using which of the following keys:
F2
What steps must be taken if there is a fan-related error message displayed at the Start up, but the
system boots to the OS?
NOT Check for Dust or debris on the Fans, clean them
Check the System Event logs for any thermal messages or fan failures?
Select the statements which are right concerning RAID 5
not It stripes the data among the drives with a parity bit
Check all that applies when troubleshooting PSU issue in a Dell Precision Rack
If a PSU indicates Blinking amber, this indicates Power supply is operational NOT
AC PSU indicator blinks green five times at a rate of 4 Hz and turns off to indicate PSU mismatch ?
Which screwdriver is recommended for removing PHM (Processor Heat Sink module) used on a
Precision Rack 7920?
Torx #T30
Under what scenarios can we clear the NVRAM by moving the PSWD jumper to the RTCRST pins?
NOT post, power, boost
not vidEO
Which RAID mirrors the data between the two drives without parity?
not raid0, Raid1?
How many intrusion switches are there in Dell Precision Tower 7920?
1
In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM)
together with the processor. There is no need to separate the PHM from the processor.
, True
We Import a Foreign configuration in a RAID Array, if:
The array containing foreign configuration is in an Offline state
USB Service Key is used for Windows OS installation and debranding (for OEM) in an Edge Gateway
True
Overclocking is the process of making a computer or component in a computer operate faster than
specified by the manufacturer by modifying the system parameters
True
Which indicator shows whether power is present or a power fault has occurred in Precision
Workstation systems?
Both AC PSU and DC PSU LEDs
On Latitude 14 Rugged Extreme - 7414, which light is used to communicate error using Single LED ?
Battery light
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider
must select the manageability option upon first boot after replacement
True
The Easy Restore feature to restore Service tag, licenses, UEFI configuration is available in Rugged
Latitude
False
Which keyboard key is used in an Edge Gateway 3000 series to start ePSA?
F9
Select statements that are true about Trusted Platform Module (TPM)
The Trusted Platform Module (TPM) is used to generate and store keys
It can create and store digital certificates
It can also be used to enable the BitLocker hard drive encryption
The Edge Gateway 3000 series support the following power sources:
not Power over Ethernet (PoE 37V DC-57VDC)
Display Port? NOT 3-pin DC -IN? NOT
BOSS stands for:
Boot Optimized Storage Solution
In general, an Anti-Static Mat is used to prevent Electrostatic damage
With 100% Correct Answers 2024.
NIC Activity LED is off and Link indicator is green. This indicates NIC is connected to a valid network at
its maximum port speed but data isn't being sent/received
True
When the side cover of Precision Tower 7920 is not assembled, the system will still power on.
False
The BIOS can be accessed in a Dell System using which of the following keys:
F2
What steps must be taken if there is a fan-related error message displayed at the Start up, but the
system boots to the OS?
NOT Check for Dust or debris on the Fans, clean them
Check the System Event logs for any thermal messages or fan failures?
Select the statements which are right concerning RAID 5
not It stripes the data among the drives with a parity bit
Check all that applies when troubleshooting PSU issue in a Dell Precision Rack
If a PSU indicates Blinking amber, this indicates Power supply is operational NOT
AC PSU indicator blinks green five times at a rate of 4 Hz and turns off to indicate PSU mismatch ?
Which screwdriver is recommended for removing PHM (Processor Heat Sink module) used on a
Precision Rack 7920?
Torx #T30
Under what scenarios can we clear the NVRAM by moving the PSWD jumper to the RTCRST pins?
NOT post, power, boost
not vidEO
Which RAID mirrors the data between the two drives without parity?
not raid0, Raid1?
How many intrusion switches are there in Dell Precision Tower 7920?
1
In a scenario where the System Board is replaced, remove the Processor Heatsink Module (PHM)
together with the processor. There is no need to separate the PHM from the processor.
, True
We Import a Foreign configuration in a RAID Array, if:
The array containing foreign configuration is in an Offline state
USB Service Key is used for Windows OS installation and debranding (for OEM) in an Edge Gateway
True
Overclocking is the process of making a computer or component in a computer operate faster than
specified by the manufacturer by modifying the system parameters
True
Which indicator shows whether power is present or a power fault has occurred in Precision
Workstation systems?
Both AC PSU and DC PSU LEDs
On Latitude 14 Rugged Extreme - 7414, which light is used to communicate error using Single LED ?
Battery light
The Dell Precision System board is shipped in Manufacturing mode and the User or Service Provider
must select the manageability option upon first boot after replacement
True
The Easy Restore feature to restore Service tag, licenses, UEFI configuration is available in Rugged
Latitude
False
Which keyboard key is used in an Edge Gateway 3000 series to start ePSA?
F9
Select statements that are true about Trusted Platform Module (TPM)
The Trusted Platform Module (TPM) is used to generate and store keys
It can create and store digital certificates
It can also be used to enable the BitLocker hard drive encryption
The Edge Gateway 3000 series support the following power sources:
not Power over Ethernet (PoE 37V DC-57VDC)
Display Port? NOT 3-pin DC -IN? NOT
BOSS stands for:
Boot Optimized Storage Solution
In general, an Anti-Static Mat is used to prevent Electrostatic damage
