API 653 Certification - Practice Exam - Open Book Rated A+
API 653 Certification - Practice Exam - Open Book Rated A+ An insert plate is required for a new 4 NPS nozzle (4.5" O.D.) in the shell. What is the minimum diameter for this insert? A. 4.5" B. 9" C. 12" D. 16.5" D. 16.5" A welder is qualified on a plate in the 3G position. The welder is qualified for what fillet weld position(s)? A. None B. F, H C. F, H, V D. All fillets C. F, H, V When must a shim be placed under an Image Quality Indicator? A. When the area of interest is darker. B. When the area of interest is darker by more than 15%. C. When the area of interest is lighter D. When the area of interest is lighter by more than 15%. by more than 15%. D. When the area of interest is lighter A welder passes a qualification test using a 3 NPS pipe with a groove weld. What is the maximum pipe diameter that the welder is now qualified to weld? A. 2-7/8" B. 4" C. 8" D. Unlimited D. Unlimited A portion of a 1/2" thick shell plate is replaced. What is the closest distance allowed between this plate and the adjacent vertical weld? A. 3" B. 6" C. 10" D. 12" B. 6" Tank Number: T-100 Diameter: 114' Specific Gravity: 0.9 Plate Material: A-283 gr C Shell Corrosion Rate: 0.003"/yr Allowable Liquid Height: 40' Construction Code: API 650 4th Edition A corroded area is found 3' from the bottom and 4" from the nearest weld. The lowest reading in the locally corroded area is 0.368". What is the critical length "L" in the corroded area? A. 12" B. 24" C. 25" D. 40" B. 24" Tank Number: T-100 Diameter: 114' Specific Gravity: 0.9 Plate Material: A-283 gr C Shell Corrosion Rate: 0.003"/yr Allowable Liquid Height: 40' Construction Code: API 650 4th Edition A corroded area is found 3' from the bottom and 4" from the nearest weld. The lowest reading in the locally corroded area is 0.368". What is the required thickness "tmin" in this corroded area? A. 0.407" B. 0.418" C. 0.452" D. 0.464" E. 0.492" B. 0.418" Tank Number: T-100 Diameter: 114' Specific Gravity: 0.9 Plate Material: A-283 gr C Shell Corrosion Rate: 0.003"/yr Allowable Liquid Height: 40' Construction Code: API 650 4th Edition A corroded area is found 3' from the bottom and 4" from the nearest weld. The lowest reading in the locally corroded area is 0.368". API 653 sets a limit on the thickness of "t2". In order to provide a 10 year run, what is the minimum thickness that "t2" can be during this inspection? A. 0.211" B. 0.251" C. 0.281" D. 0.301" E. 0.309" C. 0.281" A reinforcement plate is added to an existing 6 NPS nozzle. The shell plate is 1.125" thick and the reinforcement plate is 0.625" thick. What is the required size of the fillet weld joining the reinforcement pad to the nozzle? A. 0.3125" B. 0.4375" C. 0.625" D. 1.125" B. 0.4375" A 3/4" thick A-662-C plate is used for during a tank shell repair. For this material, determine the tank's lowest operating temperature. (Impact testing of the material has not been performed.) A. -25 °F B. -10 °F C. +15 °F D. +41 °F C. +15 °F A flush patch (patch with butt welds) is installed in a shell plate that is 1" thick. What is the closest
Document information
- Uploaded on
- March 12, 2024
- Number of pages
- 20
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers