NASCLA Exam Questions and Answers Already Passed Wood plates are being laid out so that the rough openings for the doors can be located. Anchor bolts must be placed so that there is a bolt located within how many inches from the end of each section plate? ✔✔12 inches A contractor puts in a claim under a comprehensive standard general liability policy. The policy has no additional coverage, riders, or floaters, and has a $1,000 deductible per occurrence. The claim is for a job -site accident that caused $5,000 of injuries to employees, $1,000 of injuries t o a pedestrian, $3,000 damage to the contractor's equipment, and $3,000 loss of project materials purchased by the contractor. The insurance company is liable for ✔✔$0.00 What is the minimum temperature to be maintained during gypsum board finishing proce dures? ✔✔50 degrees For a concrete masonry wall to be solid, all units must have at least what percentage of its net area as solid? ✔✔75%
Preview 1 out of 3 pages
Exam (elaborations)
NASCLA Exam Questions and Answers Already Passed
Preview 1 out of 3 pages
NASCLA Exam Questions and Answers Already Passed Wood plates are being laid out so that the rough openings for the doors can be located. Anchor bolts must be placed so that there is a bolt located within how many inches from the end of each section plate? 12 inches A contractor puts in a claim under a comprehensive standard general liability policy. The policy has no additional coverage, riders, or floaters, and has a $1,000 deductible per occurrence. The claim is for a job-site accident that caused $5,000 of injuries to employees, $1,000 of injuries to a pedestrian, $3,000 damage to the contractor's equipment, and $3,000 loss of project materials purchased by the contractor. The insurance company is liable for $0.00 What is the minimum temperature to be maintained during gypsum board finishing procedures? 50 degrees For a concrete masonry wall to be solid, all units must have at least what percentage of its net area as solid? 75% Metal panels that are designed to act as stressed-skin panels are attached directly to the structural frame of the building with clips Which phase of the value engineering process involves creating design concepts for the alternatives identified in the evaluation phase? development phase Which is a true statement regarding the maximum construction load that can be placed on an unbraced truss? No load can be supported by an unbraced truss. Which is true about compacting the sub-base in preparation for concrete placement? The thinner the lift the better the compaction Concrete is being placed during cold weather when the temperature is above 40 degrees. According to the American Concrete Institute, if the concrete is heated, which is true about the effect on the minimum curing time? 5 days is required at 50 degrees F What is the purpose of a vapor retarder in a built-up roof system? prevent condensation from accumulating in the roof According to OSHA, welded alloy steel chain slings shall have permanently affixed durable identification. Which specification is NOT required to be included? date manufactured
Content preview
Document information
- Uploaded on
- March 4, 2024
- Number of pages
- 3
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers
$8.99
Wrong document? Swap it for free
Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
