Review for Chapter 1 Graded A+
Review for Chapter 1 Graded A+ A heating and air-conditioning service technician can usually troubleshoot heating and air conditioning systems without the voltage being supplied to the equipment. T or F True What is a live electrical circuit? A circuit that is being supplied with electrical potential (voltage). Which of the following voltages will a refrigeration, heating, and air-conditioning technician come in contact with in the industry? 24 volts 120 volts 240 Volts d. all of the above Correct Electrical shock occurs when a person _____? becomes part of an electric circuit What are the important elements of electrical safety when working around live circuits? respect electricity, do not be careless, make sure electrical power is disconnected from circuits that are being worked on if possible, learn the safety rules in section 1.7 Which of the following conditions is the most dangerous and likely to cause serious injury? The technician touches a live conductor with his right hand and touches a ground with his left hand. Which of the following is the standard by which electrical installations are measured in the United States? National Electrical Code® A current flow of 0.1 ampere or less could be fatal. T or F What type of ladder should the technician use on the job? Mr. Dien True Fiberglass (Both B and C) Check with What precautions should be taken when you see a coworker receiving an electrical shock? touch a person who is receiving an electrical shock. Never It is recommended that at least one person on a truck know CPR. T or F True The correct fuse size for an electrical circuit is one that is sized twice as large as needed for circuit protection. T or F False What is the difference between a two-prong plug and a three-prong plug? a ground, while a two-prong plug does not. Which prong on a three-prong plug is the ground? A three-prong plug has the center semicircular prong A grounding adapter does no good if it is not connected to an electrical ground. T or F True An electrical device that will open an electrical circuit, preventing current flow to the circuit if a small leak to ground is detected, is called a _____. GFCI Receptacles used on the job site should be protected with a GFCI.True or False True What precautions should you use when working in an area with a large number of people and you
Document information
- Uploaded on
- February 26, 2024
- Number of pages
- 3
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers