CR101B Introduction to Collision Repair Questions And Answers Which of these warnings is shown in the symbol below? - correct answer Flammable
The reason a safety cable is used on a pulling chain is to: - correct answer help reduce backlash if the chain comes loose.
Why are a type of lineman's gloves recommended when working with high voltage parts? - correct answer They are electrically insulated.
Which of these safety items is recommended when doing the process shown in the photo below? (Using a hammer & dolly) - correct answer Safety glasses
Which of these warnings is shown in the symbol below? - correct answer Poison
Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) - correct answer Sparking from the welding process
Which of these safety items is missing on the technician in the photo below? (Using angle grinder) - correct answer Full-face shield CR101B Introduction to Collision Repair Questions And Answers Which of these safety items is missing on the technician in the photo below? (Wiping a car down with something) - correct answer Protective gloves
Which of these sheathing colors is commonly used to designate high voltage wiring? - correct answer Bright orange
Which of these safety equipment items avoids flash burn when observing the task shown in the photo below? (welding) - correct answer Welding helmet
Technician A says that employers are allowed to remove information from an SDS for use in the work place. Technician B says that employers should retain an SDS for 30 years after the product is no longer used. Who is right? - correct answer B only
A carcinogen is a substance that causes: - correct answer cancer
Olfactory fatigue is when a person: - correct answer can no longer smell a chemical after exposure.
A Class B fire extinguisher could be used on a: - correct answer burning solvent. CR101B Introduction to Collision Repair Questions And Answers Which of these can occur while welding on a panel that has a catalyzed clearcoat finish? - correct answer Release of isocyanate vapors
Hepatitis B is considered: - correct answer a blood borne pathogen.
Information on cleaning a hazardous material spill can be found in what section of an SDS? - correct answer Accidental Release Measures
If a container does not have a label, a technician should: - correct answer avoid handling material until identified.
Which of these should be worn when using a half- mask supplied-air respirator during refinishing? - correct answer Goggles
A flammable material: - correct answer can easily catch fire and burn rapidly or explosively.
The process being shown in the photo above is: (body filler) - correct answer applying body filler.
A supplement is a: - correct answer change to the damage report.
The reason a safety cable is used on a pulling chain is to: - correct answer help reduce backlash if the chain comes loose.
Why are a type of lineman's gloves recommended when working with high voltage parts? - correct answer They are electrically insulated.
Which of these safety items is recommended when doing the process shown in the photo below? (Using a hammer & dolly) - correct answer Safety glasses
Which of these warnings is shown in the symbol below? - correct answer Poison
Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) - correct answer Sparking from the welding process
Which of these safety items is missing on the technician in the photo below? (Using angle grinder) - correct answer Full-face shield CR101B Introduction to Collision Repair Questions And Answers Which of these safety items is missing on the technician in the photo below? (Wiping a car down with something) - correct answer Protective gloves
Which of these sheathing colors is commonly used to designate high voltage wiring? - correct answer Bright orange
Which of these safety equipment items avoids flash burn when observing the task shown in the photo below? (welding) - correct answer Welding helmet
Technician A says that employers are allowed to remove information from an SDS for use in the work place. Technician B says that employers should retain an SDS for 30 years after the product is no longer used. Who is right? - correct answer B only
A carcinogen is a substance that causes: - correct answer cancer
Olfactory fatigue is when a person: - correct answer can no longer smell a chemical after exposure.
A Class B fire extinguisher could be used on a: - correct answer burning solvent. CR101B Introduction to Collision Repair Questions And Answers Which of these can occur while welding on a panel that has a catalyzed clearcoat finish? - correct answer Release of isocyanate vapors
Hepatitis B is considered: - correct answer a blood borne pathogen.
Information on cleaning a hazardous material spill can be found in what section of an SDS? - correct answer Accidental Release Measures
If a container does not have a label, a technician should: - correct answer avoid handling material until identified.
Which of these should be worn when using a half- mask supplied-air respirator during refinishing? - correct answer Goggles
A flammable material: - correct answer can easily catch fire and burn rapidly or explosively.
The process being shown in the photo above is: (body filler) - correct answer applying body filler.
A supplement is a: - correct answer change to the damage report.
