MSF Basic Rider Course Exam Study Guide 2024
Motorcycling is serious fun. - Serious because there is risk. Fun Because motorcycling is a joy. Riding well requires these physical traits. - Health, enough fitness, strength and coordination. Rider coaches - Guide me. A coach will not permit riding on course when - I become a risk to myself and others. Successful course completion - Complete all assignments, attend all all sessions, pass a knowledge test, pass a motorcycle skill test, The three types of motorcycles are - Street, dual purpose, and off high-way. Street Motorcycle - can be ridden on the street for cruising around. Six primary controls - Handlebars, throttle, clutch lever, gearshift lever, front break, rear break lever. Throttle - controls speed Clutch - power from engine to rear wheel Gear shift - is operated with the left foot Shift pattern - Lift up to go to a higher gear, press down to go to a lower gear. Break control operation - Hand, squeeze, Foot press down the amount of squeeze must be adjusted to need. Fuel Supply Valve - On, Reserve and Prime Position on Ignition Switch - On, off and lock Lock and Park - Engage the steering and allow the key to be removed Park - Allows taillight to be turned on. Choke - Provides an enriched fuel to be mixed to start a cold engine. Engine shut off switch - Shut off engine without removing your hand from handle grip "Kill switch" Side Stand - Supports bike when parked. Center Stand - Maintenance procedures. Rear tire up and more stable. Engine Start and Stop - Fuel, Ignition, Neutral, Engine Cut-off Switch (run), Choke/Clutch Stop the engine - Engine Cutt-off switch (off), turn ignition key off, fuel supply to valve off: Thumb, key valve Friction Zone - Controls connection between the engine and rear wheel. Squeezing the clutch - Removes power to rear wheel Loss of Control - Squeeze and hold the clutch lever in. Right wrist position - "Flat", (fingers around the throttle. Riding position - Back up straight, head and eyes up, feet on foot rests and near controls. Knees and elbows in. Motorcycle lean higher than walking speed - Leaning the motorcycle and turning handle bars in the direction you want to. Motorcycle lean at higher speeds - pressing forward or down on handle grip in the same direction you want to go. Action Steps For Making Turns - Slow, look, press and roll. Search, Set-up and Smooth - Search while approaching, Set-up adjust speed and lane position, Smooth operate controls so there are no jerky movements. Counterweighting - Used primarily in slow, tight turns; ridershifts weight opposite to the lean of the motorcycle. Square the handle bars - refers to centering the sterring wheel with the motorcycle upright and pointing in a straight line. Front break (70 percent more stopping power) - Front tire pressing foward gives more grip to the rear tire. Gear at stop - 1st gear by the time you stop.
Document information
- Uploaded on
- January 25, 2024
- Number of pages
- 7
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers