CTR 156CT PROPANE FINAL EXAM QUESTIONS WITH VERIFIED SOLUTIONS GRADED A+

CTR 156CT PROPANE FINAL EXAM QUESTIONS WITH VERIFIED SOLUTIONS GRADED A+ If you see an "S" next to the date on a cylinder, that means the cylinder must be requalified _________ from that date. - CORRECT ANS 10 years ____________ control the flow of propane through the piping system of a dispenser. - CORRECT ANS Valves At room temperature, propane is in what state? - CORRECT ANS Gas Make sure there are no ignition sources within _______ feet of the autogas filling area. - CORRECT ANS 25 When filling a cylinder by volume and a white mist begins to escape from the fixed maximum liquid level gauge, you need to immediately __________. - CORRECT ANS close the hose end valve The permanent marking "4BA240" tells you that the cylinder is made of ___________. - CORRECT ANS Alloy steel A person can be inside a motorhome while the tank is being filled. - CORRECT ANS False ___________________ is added to propane to increase the likelihood that a leak will be detected. - CORRECT ANS Odorant Propane autogas dispensing systems typically use a ________ to fuel the vehicle. - CORRECT ANS gasoline-style, low-emission nozzle CTR 156CT PROPANE FINAL EXAM QUESTIONS WITH VERIFIED SOLUTIONS GRADED A+ When filling a cylinder by volume, the cylinder will be full when ________. - CORRECT ANS white mist begins to escape from the fixed maximum liquid level gauge. A customer walks up to your propane filling station to buy Autogas for his vehicle. Can you sell him a 20lb cylinder to take back to the car to fill it where it ran out of fuel? - CORRECT ANS No Only use fire extinguishers to create an escape route — NOT to fight a propane fire. - CORRECT ANS True Cylinders may not be filled if they are past their ___________________ date. - CORRECT ANS Re-qualification All vehicle-mounted ASME tanks are equipped with a(n) ________. (Select all that apply.) - CORRECT ANS fixed maximum liquid level gauge relief valve ASME data plat