IAHCSMM CRCST Exam Questions and Answers Already Passed

IAHCSMM CRCST Exam Questions and Answers Already Passed The physical method by which an ultrasonic units clean is called Cavitation Equipment should be inspected for obvious hazards such as cracked or frayed electrical cords: whenever the equipment is cleaned Impregnated Gauze Strips may be sterilized using: dry heat sterilization Powered surgical instruments should be cleaned using a mechanical cleaning process. False. They should all be cleaned manually. Agency responsible for the MedWatch program FDA food and drug administration Phenolics are classified as intermediate to low level disinfectants To prevent coagulation of proteins, water temperature should be Below 43 C (110 F) Secondary containers of chemicals must be labeled with a copy of the original manufacturer's label or a generic label that identifies hazard warnings and directions These carry blood away from the heart arteries The percentage of hospital patients that develop a healthcare facility-associated infection. Approximately 10% Spiral shaped bacteria are classified as spirillum The two most common techniques of flat wrap packaging are Square-fold and envelope-fold Third party reprocessors are regulated by the FDA True In central service, the concept of "one-way flow of materials" refers to the movement of products From soiled areas to clean processing areas within central service Horizontal work surfaces in the decontamination area should be cleaned and disinfected At the beginning and end of each shift. A material that removes electrons from another substance is Called an oxidizing agent Pre-Vacuum Steam Sterilizer & Steam Flush Pressure-Pulse (SFPP) Use an active air removal system These chemicals are used on animate (living tissue) to slow the growth of microorganisms: antiseptics Agency responsible for regulating EO OSHA and EPA Scissors with tungsten carbide cutting edges are usually identified by gold handles 7.2 pounds per cubic foot Maximum density for linen packs Package condensation will occur when Placing hot or warm packages in cold surfaces The decontamination area of the central service department should have 10 air exchanges per hour