Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 4 out of 51 pages
Exam (elaborations)

PHYSICAL DAMAGE EXAM FOR PA APPRAISAL LICENSE WITH BEST EXPLANATION

Document preview thumbnail
Preview 4 out of 51 pages

PHYSICAL DAMAGE EXAM FOR PA APPRAISAL LICENSE WITH BEST EXPLANATION  The driver's side window of a vehicle is being put back into place withan adhesive. Technician A says the glass hardware should be reinstalled before putting the glass in place with the adhesive.Technician B says that the hardware should be reinstalled while the glass adhesive is curing.Who isright? Select the Correct Answer Technician A only Technician B only Neither technician is correct Both technicians are correct: Neither technician isright.The hardware should notbe reinstalled until the adhesive has fully finished curing.  In the course of disassembling a suspension, a technician removes a boltthat has a blue coating applied to its threads. He should: Select the Correct Answer reuse the bolt if most of the blue coating is still ce the bolt with a new fastener. use a thread-locking agent on it. change out the bolt with a new rivas pin oscillator bolt.: replace the bolt with anew fastener.. Explanation: When a technician removes a fastener with a coating on its threads, this tells him that the bolt is a one-time use fastener.The coating is compromised in the removaloperation and needs to be replaced.  When removing a doorskin,TechnicianA says an air chiselshould be usedto separate the welded door skin from the door skin hem flange.Technician Bsays a grinder should be used to grind away the edge of the door skin. Who is right? Select the Correct Answer Technician A is correct Technician B is correct Both technicians are correct Neither technicians are correct: Technician B is correct is correct. Explanation: An air chisel would cause too much damage to the doorskin hem flange.The proper method is to use a grinder.  Which of the following terms supports insurable interest? Select the Correct Answer Actual cash value Indemnity Replacement cost Fair market value: Indemnity is correct. Explanation: Insurable interest is economic interest; having a financial stake in property; having something to lose in property. When you own property, have property of others in your possession, or have legal title to property, you have an insurable interest. If there is a covered loss, you will be indemnified or made who only to the extent of your insurable interest and subject to the policy limits.  In the four-stroke power cycle, what term describes the up motion of thepiston? Select the Correct Answer Compression stroke Intake stroke Powerstroke Exhaust stroke: Compression stroke. Explanation: When the piston moves back up, it compressesthe fuel/airmixture into a smallspace between the top of the piston and the top of the cylinder. This space is called the combustion chamber.This movement is called the compression stroke.

Content preview

PHYSICAL DAMAGE EXAM FOR PA APPRAISAL LICENSE
WITH BEST EXPLANATION

 The driver's side window of a vehicle is being put back into place withan
adhesive. Technician A says the glass hardware should be reinstalled before putting
the glass in place with the adhesive. Technician B says that
the hardware should be reinstalled while the glass adhesive is curing. Who isright?



Select the Correct Answer

Technician A only
Technician B only
Neither technician is correct
Both technicians are correct: Neither technician is right. The hardware should notbe
reinstalled until the adhesive has fully finished curing.
 In the course of disassembling a suspension, a technician removes a boltthat has a
blue coating applied to its threads. He should:



Select the Correct Answer

reuse the bolt if most of the blue coating is still intact.replace
the bolt with a new fastener.
use a thread-locking agent on it.
change out the bolt with a new rivas pin oscillator bolt.: replace the bolt with anew
fastener..

Explanation:

When a technician removes a fastener with a coating on its threads, this tells him that the
bolt is a one-time use fastener. The coating is compromised in the removaloperation and
needs to be replaced.
 When removing a door skin,Technician A says an air chisel should be usedto separate

,the welded door skin from the door skin hem flange. Technician Bsays a grinder should
be used to grind away the edge of the door skin. Who is right?

,Select the Correct Answer

Technician A is correct
Technician B is correct
Both technicians are correct
Neither technicians are correct: Technician B is correct is correct.

Explanation:

An air chisel would cause too much damage to the door skin hem flange. The proper
method is to use a grinder.
 Which of the following terms supports insurable interest?


Select the Correct Answer

Actual cash value
Indemnity
Replacement cost
Fair market value: Indemnity is correct.

Explanation:

Insurable interest is economic interest; having a financial stake in property; having
something to lose in property. When you own property, have property of others in your
possession, or have legal title to property, you have an insurable interest. If there is a
covered loss, you will be indemnified or made who only to the extent of your insurable
interest and subject to the policy limits.
 In the four-stroke power cycle, what term describes the up motion of thepiston?


Select the Correct Answer

Compression stroke
Intake stroke
Power stroke
Exhaust stroke: Compression stroke.

, Explanation:

When the piston moves back up, it compresses the fuel/air mixture into a small space
between the top of the piston and the top of the cylinder. This space is called the
combustion chamber. This movement is called the compression stroke.
 An automobile that has its substructure built into the front end and bodypanels of
the vehicle is called a:



Select the Correct Answer

shell vehicle.
channel vehicle. conventional
frame vehicle.
unibody vehicle.: unibody vehicle. is correct.

Explanation:

A conventional frame vehicle has a separate substructure to which the vehicle's frontend,
body and mechanical parts are bolted. There is no such thing as a shell or channel
vehicle. An automobile that has its substructure built into the front end andbody panels
of the vehicle is called a unibody vehicle.
 When reading the printout from a computerized measuring system, it is
discovered that the front rails are +22mm on the right and -22mm on the leftat the
same position. Technician A says the vehicle is swayed to the right. Technician B says
the vehicle is swayed to the left. Who is right?




Select the Correct Answer

Technician A only
Technician B only
Both technicians are correct
Neither technician is correct: The correct answer is: Technician A only.

Document information

Study
Uploaded on
November 14, 2023
Number of pages
51
Written in
2023/2024
Type
Exam (elaborations)
Contains
Questions & answers
$26.88

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Sold
1
Followers
0
Items
75
Last sold
1 year ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions