Quality Assurance Basics
Why do we need Quality Assurance? (primary objective) - Correct Answer-To enable prompt and accurate image diagnosis What are the 3 secondary objectives to QA? - Correct Answer-1. To maintain the quality of diagnostic images 2. to minimise the radiation exposure to patient and staff 3. to be cost effective Who is Responsible for Quality Assurance Programs? - Correct Answer-Radiologist in charge But ultimately everyone is actively involved. QC responsibility is often delegated to: - Correct Answer-Chief Radiographer Radiology Physicist QA Radiographer Radiation Safety Officer Measurement Accuracy How would we get THE ERROR from the measurements we get from any experiment? - Correct Answer-Get MORE measurement to get an idea of the spread of results (which is the error) How would you use the BULLSEYE concept to 1. Precision 2. Accuracy - Correct Answer-Precision - darts (measurements) are much closer together but further away from the bullseye Accuracy - darts (measurements) more spread out but closer to the bullseye When TESTING and taking measurements we also need to take account of VARIABILITIES such as... - Correct Answer-temperature - affecting the x-ray tube - ionisation chambers are sensitive to temperature and pressure - if the daily temp is rising it may affect the measurements taken for the output Variation and limit FORMULA Coefficient of variance: (what do you do the answer to get precision?) - Correct Answer-COV = st dev/ mean x100 to get PRECISION Type of QC Tests What are the 4 types? - Correct Answer-1. Acceptance testing of equipment 2. Regulatory compliance 3. Preventive maintenance and Repair 4. Routine Quality Control Acceptance Testing What is acceptance testing? Why is acceptance testing needed? - Correct Answer-- it is performed on new equipment or - equipment that has undergone major repairs * to demonstrate equipments are performing within the manufacturer's specifications and criteria * meets purchasing requirements * detect any defects that may exist * to establish BASELINE that may be used as reference point in future testing What is the condition that goes along with Acceptance Testing and use in clinical practice? - Correct Answer-- Acceptance testing should be performed by MEDICAL PHYSICIST in the presence of the supplier/ engineer before the equipment is used for clinical work
Document information
- Uploaded on
- November 3, 2023
- Number of pages
- 12
- Written in
- 2023/2024
- Type
- Other
- Person
- Unknown