AM
EX
Basic Safety Test
1. lockout/tagout a formal procedure for taking equipment out of service and
ensuring it cannot be operated until a qualified person has
returned it to service
2. arc welding a process of joining metal parts by fusion
3. flammable scrap materials catch fire and burn easily, remove them
regularly from the work area
4. dross the cutting process results in oxides that mix with molten
iron and produce what
5. excavation any man-made cut, cavity, trench, or depression in an
earth surface, formed by removing earth
6. competent per- identifies unsanitary, hazardous, or dangerous working
son conditions and has the authority to correct or eliminate
them
7. confined space large enough to work in but has limited means of entry or
exit; sometimes a permit is required to work in it
8. combustible store these liquids in safety cans to avoid the risk of fire
9. shoring pieces of metal or wood placed diagonally from the bottom
of one rail to the top of another rail that add support to a
structure
10. electrical distrib- houses the circuits that distribute electricity throughout a
ution panel structure
11. extension ladder two straight ladders that are connected so the length of
the ladder can be changed
12. flash goggles used to protect your eyes from the flash
13. flash the sudden bright light that occurs when you start up a
welding operation
14.
1/4
EX
Basic Safety Test
1. lockout/tagout a formal procedure for taking equipment out of service and
ensuring it cannot be operated until a qualified person has
returned it to service
2. arc welding a process of joining metal parts by fusion
3. flammable scrap materials catch fire and burn easily, remove them
regularly from the work area
4. dross the cutting process results in oxides that mix with molten
iron and produce what
5. excavation any man-made cut, cavity, trench, or depression in an
earth surface, formed by removing earth
6. competent per- identifies unsanitary, hazardous, or dangerous working
son conditions and has the authority to correct or eliminate
them
7. confined space large enough to work in but has limited means of entry or
exit; sometimes a permit is required to work in it
8. combustible store these liquids in safety cans to avoid the risk of fire
9. shoring pieces of metal or wood placed diagonally from the bottom
of one rail to the top of another rail that add support to a
structure
10. electrical distrib- houses the circuits that distribute electricity throughout a
ution panel structure
11. extension ladder two straight ladders that are connected so the length of
the ladder can be changed
12. flash goggles used to protect your eyes from the flash
13. flash the sudden bright light that occurs when you start up a
welding operation
14.
1/4
