Software Engineering 10 – Solutions Manual 1
Software Engineering 10
Solutions Manual
IAN SOMMERVILLE
These solutions are made available for instructional purposes only. Neither the
author nor the publisher warrants the correctness of these solutions nor accepts any
liability for their use. Solutions may only be distributed to students and it is a
condition of distribution that they are only distributed by accredited instructors
using ‘Software Engineering, 10hedition’ as a textbook. The solutions may be made
available to students on a password-protected intranet but must not be made
available on a publicly-accessible WWW server.
©Ian Sommerville 2014
,2 Software Engineering 10 – Solutions Manual
©Ian Sommerville 2014
,Software Engineering 10 – Solutions Manual 3
Preface
This solutions manual is intended to help teachers of software engineering courses
in marking homework questions for students. Each chapter in the book has 10
exercises of different types, which you may set for students either as is or in a
modified form. I have supplied answers to 50% of the exercises in this manual.
The exercises for which answers have not been supplied are, generally, of
one of three types:
1. Simple exercises whose answers can be found in the text of the chapter.
There are typically one or two of these questions in each chapter and they
are intended to stimulate students to read the chapter.
2. Design problems for which there is a range of solutions and you have to use
your judgment to decide if the solution is appropriate. Supplying a solution
here would imply that there is only one right answer to the question.
3. Ethics-related questions as the aim of these questions is to encourage
students to think about the ethics issues involved. The notion of a right and
wrong answer does not apply in this case as the student’s response to the
question depends both on their cultural background and on their particular
views on a topic. I suggest that these questions should be used to stimulate
class discussions rather than as part of class tests.
It is important when marking the student’s answers to exercises to see the
supplied solutions as a guide only rather than a definitive statement of the only
possible answer to the question. It is generally good educational practice to give
students credit for what they know and if they produce credible answers that reveal
they have thought about the exercise and have some knowledge of the topic, then
this should be rewarded.
This solutions manual may be used in conjunction with the associated quiz
book, which lists short questions and answers for each chapter in the book. These
can be used for short class tests to assess if students have read the material or as
self-assessment tests which the students complete in their own time.
If you think that I have made a mistake in some of these answers (quite
possible), please let me know. In some cases, there are obviously several possible
answers and you may disagree with my solutions. I’d be delighted to consider
including your alternative solutions but I do not have time to engage in detailed
email discussions about the exercises in the book.
Ian Sommerville
October 2014
©Ian Sommerville 2014
, 4 Software Engineering 10 – Solutions Manual
1 Introduction
1.2 What is the most important difference between generic software product
development and custom software development? What might this mean in
practice for users of generic software products?
The essential difference is that in generic software product development, the
specification is owned by the product developer. For custom product development,
the specification is owned and controlled by the customer. The implications of this
are significant – the developer can quickly decide to change the specification in
response to some external change (e.g. a competing product) but, when the
customer owns the specification, changes have to be negotiated between the
customer and the developer and may have contractual implications.
For users of generic products, this means they have no control over the
software specification so cannot control the evolution of the product. The developer
may decide to include/exclude features and change the user interface. This could
have implications for the user’s business processes and add extra training costs
when new versions of the system are installed. It also may limit the customer’s
flexibility to change their own business processes.
1.3 What are the four important attributes that all professional software should
have? Suggest four other attributes that may sometimes be significant.
Four important attributes are maintainability, dependability, performance and
usability. Other attributes that may be significant could be reusability (can it be
reused in other applications), distributability (can it be distributed over a network
of processors), portability (can it operate on multiple platforms e.g laptop and
mobile platforms) and inter-operability (can it work with a wide range of other
software systems).
Decompositions of the 4 key attributes e.g. dependability decomposes to security,
safety, availability, etc. is also a valid answer to this question.
©Ian Sommerville 2014
Software Engineering 10
Solutions Manual
IAN SOMMERVILLE
These solutions are made available for instructional purposes only. Neither the
author nor the publisher warrants the correctness of these solutions nor accepts any
liability for their use. Solutions may only be distributed to students and it is a
condition of distribution that they are only distributed by accredited instructors
using ‘Software Engineering, 10hedition’ as a textbook. The solutions may be made
available to students on a password-protected intranet but must not be made
available on a publicly-accessible WWW server.
©Ian Sommerville 2014
,2 Software Engineering 10 – Solutions Manual
©Ian Sommerville 2014
,Software Engineering 10 – Solutions Manual 3
Preface
This solutions manual is intended to help teachers of software engineering courses
in marking homework questions for students. Each chapter in the book has 10
exercises of different types, which you may set for students either as is or in a
modified form. I have supplied answers to 50% of the exercises in this manual.
The exercises for which answers have not been supplied are, generally, of
one of three types:
1. Simple exercises whose answers can be found in the text of the chapter.
There are typically one or two of these questions in each chapter and they
are intended to stimulate students to read the chapter.
2. Design problems for which there is a range of solutions and you have to use
your judgment to decide if the solution is appropriate. Supplying a solution
here would imply that there is only one right answer to the question.
3. Ethics-related questions as the aim of these questions is to encourage
students to think about the ethics issues involved. The notion of a right and
wrong answer does not apply in this case as the student’s response to the
question depends both on their cultural background and on their particular
views on a topic. I suggest that these questions should be used to stimulate
class discussions rather than as part of class tests.
It is important when marking the student’s answers to exercises to see the
supplied solutions as a guide only rather than a definitive statement of the only
possible answer to the question. It is generally good educational practice to give
students credit for what they know and if they produce credible answers that reveal
they have thought about the exercise and have some knowledge of the topic, then
this should be rewarded.
This solutions manual may be used in conjunction with the associated quiz
book, which lists short questions and answers for each chapter in the book. These
can be used for short class tests to assess if students have read the material or as
self-assessment tests which the students complete in their own time.
If you think that I have made a mistake in some of these answers (quite
possible), please let me know. In some cases, there are obviously several possible
answers and you may disagree with my solutions. I’d be delighted to consider
including your alternative solutions but I do not have time to engage in detailed
email discussions about the exercises in the book.
Ian Sommerville
October 2014
©Ian Sommerville 2014
, 4 Software Engineering 10 – Solutions Manual
1 Introduction
1.2 What is the most important difference between generic software product
development and custom software development? What might this mean in
practice for users of generic software products?
The essential difference is that in generic software product development, the
specification is owned by the product developer. For custom product development,
the specification is owned and controlled by the customer. The implications of this
are significant – the developer can quickly decide to change the specification in
response to some external change (e.g. a competing product) but, when the
customer owns the specification, changes have to be negotiated between the
customer and the developer and may have contractual implications.
For users of generic products, this means they have no control over the
software specification so cannot control the evolution of the product. The developer
may decide to include/exclude features and change the user interface. This could
have implications for the user’s business processes and add extra training costs
when new versions of the system are installed. It also may limit the customer’s
flexibility to change their own business processes.
1.3 What are the four important attributes that all professional software should
have? Suggest four other attributes that may sometimes be significant.
Four important attributes are maintainability, dependability, performance and
usability. Other attributes that may be significant could be reusability (can it be
reused in other applications), distributability (can it be distributed over a network
of processors), portability (can it operate on multiple platforms e.g laptop and
mobile platforms) and inter-operability (can it work with a wide range of other
software systems).
Decompositions of the 4 key attributes e.g. dependability decomposes to security,
safety, availability, etc. is also a valid answer to this question.
©Ian Sommerville 2014
