PHYSICAL SECURITY-- (SPED), Physical Security Certification (PSC), DCSA SPeD:
Physical Security Certification (PSC) Exam Questions & Answers
Before you can conduct a risk analysis based on the impact and likelihood of an
unwanted event happening, what steps in the risk management process must you
take first? Identify (3) - Identify assets
Identify threats
Identify vulnerabilities
Which policy should you consult to find the physical security requirements of
protecting classified information? - DoDM 5200.01, Volumes 1-4 DoD
Information Security Program
Which policy authorizes commanders to issue regulations for the protection or
security of property and places under their command? - DoDI 5200.08, Security of
DoD Installations and Resources and the DoD Physical
Security Review Board (PSRB)
Which of the following individuals should be included in a Threat Working
Group? - Chemical, biological, radiological, nuclear and high yield explosive
representative, Information operations representative, Operations security officer,
Law enforcement, Counterintelligence, Antiterrorism Officer
Which of these can be made of solid steel to make them more attack resistant? -
Doors
Which of these house ventilation systems that should be secured with steel bars? -
Roofs
Which of these should be covered with a protective film to make them less
dangerous in an attack? - Windows
Which of the following locks are approved to secure classified information or
material? - Kaba Mas X-10, S&G 8077/AD
,At a minimum _________ should include special and general guard orders, access
and material control, protective barriers, lighting systems, locks, and Intrusion
Detection Systems (IDS). - Physical Security Plans
Assets fall into 5 categories, name all 5 of them. - 1. People
2. Information
3. Equipment
4. Facilities and
5. Activities and Operations
Who provides construction and security requirements for SCIFs? - Director of
National Intelligence (DNI)
Who provides accreditation for SCIFs? - Defense Intelligence Agency (DIA)
They are used by the intelligence community to store classified information. -
SCIFs are used by the intelligence community to store classified information called
Sensitive Compartmented Information (SCI).
Warning signs must be posted at each boundary of a restricted area and must be
conspicuous to those approaching on foot or by vehicle. T/F - True
The use of master key systems is acceptable in the storage of AA&E. - False. The
use of master key systems is not authorized in AA&E storage facilities.
The first line of defense in any physical security system is usually some form of? -
perimeter protection system
What kind of fencing is used when a stationary perimeter requires protection? -
Permanent
What kind of fencing can be used as a temporary perimeter to establish
psychological barriers and to channel pedestrian and vehicle movement. -
Temporary
,The basic manual access control system is simply? - personal recognition.
Although there are many different types of locks, they all share three components.
- Locking device
Switching device
Operating mechanism
Some key-operated locks are built into the door or container they are securing.
These are also known as - Mortise locks, because their case is recessed, or
mortised into a door or container.
The __________________ is the most common of all door locks in use today. -
cylindrical lock
What kind of locks are used for securing classified information? -
Electromechanical combination locks
When a container is taken out of service, the combination must be reset back to the
factory settings. The factory setting for a built-in container lock is? - 50-25-50.
You just received a security container that has the S&G 2740 Electromechanical
Safe Lock with a factory setting of 50-25-50. What should you do first? - Calibrate
the lock
Certification and accreditation (C&A) for Storage of Classified DoD Information
Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified DoD
Information Systems.
B. Designated Accrediting Authority (DAAs) have the authority and responsibility
for accreditation decisions. - B
A. Physical security is the branch of security that is only concerned with active
measures designed to prevent unauthorized access.
B. Physical security aims to safeguard assets against espionage, sabotage,
terrorism, damage, and criminal activity. - B
, Which of the following is true of access control measures? - Access control is
integral and interoperable part of DoD installation physical security programs.
The installation commander/facility director is responsible for defining access
control measures consistent with DoD policy.
Which of the following is NOT a physical security measure? - Marking classified
documents.
Name 3 physical security measures? - Perimeter Fences
Security Guards
Alarm Systems
What does a physical security program aim to prevent unauthorized access to? (4) -
Personnel
Equipment
Installations
Information
What are considered access control measures? (3) - Identification Cards
Security Guards
Locks and Keys
List the nine capabilities a security system must provide to achieve Security-in-
Depth? - Deter
Detect
Identify
Track
Assess
Record
Communicate
Delay
Respond
Physical Security Certification (PSC) Exam Questions & Answers
Before you can conduct a risk analysis based on the impact and likelihood of an
unwanted event happening, what steps in the risk management process must you
take first? Identify (3) - Identify assets
Identify threats
Identify vulnerabilities
Which policy should you consult to find the physical security requirements of
protecting classified information? - DoDM 5200.01, Volumes 1-4 DoD
Information Security Program
Which policy authorizes commanders to issue regulations for the protection or
security of property and places under their command? - DoDI 5200.08, Security of
DoD Installations and Resources and the DoD Physical
Security Review Board (PSRB)
Which of the following individuals should be included in a Threat Working
Group? - Chemical, biological, radiological, nuclear and high yield explosive
representative, Information operations representative, Operations security officer,
Law enforcement, Counterintelligence, Antiterrorism Officer
Which of these can be made of solid steel to make them more attack resistant? -
Doors
Which of these house ventilation systems that should be secured with steel bars? -
Roofs
Which of these should be covered with a protective film to make them less
dangerous in an attack? - Windows
Which of the following locks are approved to secure classified information or
material? - Kaba Mas X-10, S&G 8077/AD
,At a minimum _________ should include special and general guard orders, access
and material control, protective barriers, lighting systems, locks, and Intrusion
Detection Systems (IDS). - Physical Security Plans
Assets fall into 5 categories, name all 5 of them. - 1. People
2. Information
3. Equipment
4. Facilities and
5. Activities and Operations
Who provides construction and security requirements for SCIFs? - Director of
National Intelligence (DNI)
Who provides accreditation for SCIFs? - Defense Intelligence Agency (DIA)
They are used by the intelligence community to store classified information. -
SCIFs are used by the intelligence community to store classified information called
Sensitive Compartmented Information (SCI).
Warning signs must be posted at each boundary of a restricted area and must be
conspicuous to those approaching on foot or by vehicle. T/F - True
The use of master key systems is acceptable in the storage of AA&E. - False. The
use of master key systems is not authorized in AA&E storage facilities.
The first line of defense in any physical security system is usually some form of? -
perimeter protection system
What kind of fencing is used when a stationary perimeter requires protection? -
Permanent
What kind of fencing can be used as a temporary perimeter to establish
psychological barriers and to channel pedestrian and vehicle movement. -
Temporary
,The basic manual access control system is simply? - personal recognition.
Although there are many different types of locks, they all share three components.
- Locking device
Switching device
Operating mechanism
Some key-operated locks are built into the door or container they are securing.
These are also known as - Mortise locks, because their case is recessed, or
mortised into a door or container.
The __________________ is the most common of all door locks in use today. -
cylindrical lock
What kind of locks are used for securing classified information? -
Electromechanical combination locks
When a container is taken out of service, the combination must be reset back to the
factory settings. The factory setting for a built-in container lock is? - 50-25-50.
You just received a security container that has the S&G 2740 Electromechanical
Safe Lock with a factory setting of 50-25-50. What should you do first? - Calibrate
the lock
Certification and accreditation (C&A) for Storage of Classified DoD Information
Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified DoD
Information Systems.
B. Designated Accrediting Authority (DAAs) have the authority and responsibility
for accreditation decisions. - B
A. Physical security is the branch of security that is only concerned with active
measures designed to prevent unauthorized access.
B. Physical security aims to safeguard assets against espionage, sabotage,
terrorism, damage, and criminal activity. - B
, Which of the following is true of access control measures? - Access control is
integral and interoperable part of DoD installation physical security programs.
The installation commander/facility director is responsible for defining access
control measures consistent with DoD policy.
Which of the following is NOT a physical security measure? - Marking classified
documents.
Name 3 physical security measures? - Perimeter Fences
Security Guards
Alarm Systems
What does a physical security program aim to prevent unauthorized access to? (4) -
Personnel
Equipment
Installations
Information
What are considered access control measures? (3) - Identification Cards
Security Guards
Locks and Keys
List the nine capabilities a security system must provide to achieve Security-in-
Depth? - Deter
Detect
Identify
Track
Assess
Record
Communicate
Delay
Respond
