OSHA Basic Orientation plus Exam - Questions with verified answers

OSHA Basic Orientation plus Exam Required when you are exposed to noise over 85 decibels Hearing Protection Hearing Protection Device Ear Plugs Hearing Protection Device Ear muffs Has little or no training in identifying electrical hazards Non-Qualified Person (electrical) Has received training in and has proven skills and knowledge in the construction and operation of electric equipment Qualified Person (electrical) Occurs when a flashover of electric current leaves its intended path and travels through the air to ground or from one conductor to another Arc Flash The factor that determines the severity of electrical shock Current (electrical) Monitors the amount of current flowing from hot to neutral and trips the circuit if an imbalance happens Ground Fault Circuit Interrupter (GFCI) Safety measure that provides a continuous pathway for electrical energy to travel from a conductor or source of energy to the earth Grounding Provides a continuous pathway for electrical energy to travel from one conductor to another Bonding Electricity is used near water, the user of electrical equipment is not grounded, circuits are providing power to portable tools or outdoor receptacles, temporary wiring or extension cords are used GFCI's (requirement s) A safe work practice intended to protect you from the accidental start up of machinery or equipment or unexpected release of hazardous energy lockout/tagout Hydraulic, chemical, electrical Hazardous Energy Person who locks or tags out machines or equi pment in order to perform service or maintenance on that machine or equipment Authorized employee (lockout/tagout) Worker who operates the equipment being serviced or maintained or works in an area where the servicing or maintenance takes place Affected e mployee (lockout/tagout) Those whose work operations are or may be in an area where energy control procedure are being used Other employee (lockout/tagout) Preparation for shutdown Lockout/ tagout order (step 1) Machine or equipment isolation lockout/ tagout order (step 2) Machine or equipment shutdown lockout/tagout order (step 3) Lockout or tagout device application lockout/tagout order (step 4) Release stored energy lockout/tagout order (step 5) Verification of isolation lockout/tagout order (ste p 6) Each authorized employee will apply a personal lockout/tagout device to a group lockbox and remove it once the maintenance/repair work is complete. Group Lockout Opening in the floor, platform or pavement measuring less than 12 inches, but more than 1 inch through which materials, but not people may fall Floor Hole Opening in the floor, platform or pavement measuring 12 inches or more, and through which people may fall Floor Opening