IDFX - Building Codes question with complete solution 2023 verified (rated A+)

IDFX - Building Codes question with complete solution 2023 verified (rated A+)Building Codes - correct answer One of the main types of regulations governing the design & construction of buildings, including interior planning, construction & finishing; these are the only type of regulation affecting the design & construction of buildings, along with interior construction. - These are written to protect the health, safety & welfare of the the public. They are written based on the idea of the "least acceptable risk." CPSC - correct answer Consumer Product Safety Commission Americans with Disabilities Act (ADA) - correct answer The most notable federal-level law for interior designers, which regulates, among other things, the removal of barriers for the physically disabled. This is not just a code or standard, but a civil rights legislation. ICC - correct answer International Code Council Model Code - correct answer A local building code that has been written by a group comprised of experts' knowledge in the field, without reference to any particular geographical area. Adopting one of these allows a city, county or district to have a complete, workable building code without the difficulty * expense of writing their own. International Building Code (IBC) - correct answer Primary model code produced by the ICC & first published in 2000. BOCA - correct answer Building Officials Code Administrators International UBC - correct answer Uniform Building Code ICBO - correct answer International Conference of Building Officials SBC - correct answer Standard Building Code NEC - correct answer National Electrical Code GA - correct answer Gypsum Association ASTM - correct answer American Society for Testing & Materials ANSI - correct answer American National Standards Institute OSHA - correct answer Occupational Safety & Health Administration NRTL - correct answer Nationally Recognized Testing Laboratory UL - correct answer Underwriters Laboratories, which develops standards & tests products for safety UL Label - correct answer Label given to a product that that successfully passes a prescribed test. Listed Label - correct answer Label given to a complete & total product that passes the safety test & is manufactured under the UL follow-up services program. Classified Label - correct answer Label given to products whose samples were tested for certain types of uses only. In addition to this label, the product must also carry a statement specifying the conditions that were tested for. ASTM E119 - correct answer One of the most commonly used tests for fire resistance of construction assemblies, & is called the Standard Test Methods for Fire Tests of Building Construction & Materials.