FDNYC G60 Practice Exam Answers Correct Updated Summer 22 -23. All torch operators, an oxigen -fuel torch using any amount of oxigen and flamable gas and fire guards must have a current - Certificate of Fitness The Certificate of Fitness holder - must regulate the pressure and flow of oxygen and natural gas to each torch. if the torch operator for jewelry manufacture involves - any oxygen with any fuel gas containers, the operator must be a C of F holder. A Certificate of Fitness Holder must keep his or her certificate - on their person or otherwise readily available for inspection by any representative of the fire Department The easiest way to extinguish a fire caused by a leak is to - close the shutoff valve Permits issued by the FDNY are required to conduct the following hot work: - storing, using or handling oxygen and a flammable gas, storing, using or handling any flammable gas (e.g. LPG or CNG or acetylene) in excess of 400 SCF. Storing, using or handling any oxidizing gas (e.g. oxygen) in excess of 504 SCF. For LPG, 400 SCF is - approximately 47 lbs the number of LPG containers for the storage, use, handling or t ransportation, requiring a permit - 14.1 oz = 54 cont. 16.4 oz = 46 cont. 20 lbs = 3 cont. 33.5 lbs = 2 cont. 40 lbs = 2 cont. 100 lbs = 1 cont. Portable LPG containers that are more than 16.4 oz and CNG containers with a capacity greater than 8.7 SCF - must NOT stored, handled, or used indoors in the following occupancies (as defined in the Building code): residential occupancies, factory and industrial occupancies; educational occupancies; institutional occupancies, except as the commissioner may autho rize by rule. Site-specific permit - may be a permanent permit or a temporary permit. Permanent permits are valid for 12 months only A city -wide permit is valid - up to 30 days Permits shall be - readily available on the premise for inspection by Fire Department representatives. Hot work authorization should be issued by the responsible person, and it - must be available for inspection by any representative of the department during the performa nce of the work, and for 48 hours after the work is complete FDNY permits - will be posted in a central location and recorded in a log book to assist in the coordination of construction related activities. CNG - Compressed Natural Gas. For Citywide ho t work operations, the Owner of the premises must be notified in writing at least _____ hours in advance prior to work beginning. - 48 A class A fire extinguisher fights fires from - Paper How old must a candidate be in order to earn a Certificate of F itness? - 18 Years Old What type of fire is a Class B fire extinguisher used on? - Oil Examples of combustibles include - Newspaper An example of a flammable material would be - Gasoline Fire extinguishers must be inspected once every - Month A work area should be - Well Ventilated
Exam (elaborations)
FDNYC G60 Practice Exam Answers Correct Updated Summer 22-23.
FDNYC G60 Practice Exam Answers Correct Updated Summer 22-23. All torch operators, an oxigen-fuel torch using any amount of oxigen and flamable gas and fire guards must have a current The Certificate of Fitness holder if the torch operator for jewelry manufacture involves A Certificate of Fitness Holder must keep his or her certificate The easiest way to extinguish a fire caused by a leak is to Permits issued by the FDNY are required to conduct the following hot work: For LPG, 400 SCF is the number of LPG containers for the storage, use, handling or transportation, requiring a permit Portable LPG containers that are more than 16.4 oz and CNG containers with a capacity greater than 8.7 SCF Site-specific permit A city-wide permit is valid Permits shall be Hot work authorization should be issued by the responsible person, and it FDNY permits CNG For Citywide hot work operations, the Owner of the premises must be notified in writing at least _____ hours in advance prior to work beginning. A class A fire extinguisher fights fires from How old must a candidate be in order to earn a Certificate of Fitness? What type of fire is a Class B fire extinguisher used on? Examples of combustibles include An example of a flammable material would be Fire extinguishers must be inspected once every A work area should be A type C fire involves Automatic sprinkler heads should be A permit is required for storing a flammable gas in excess of Acetylene burns at It is dangerous to use fuel gas at pressures above A fire extinguisher must be mounted To extinguish a fire PASS stands for In the case of any fire, For piped gas, Oxygen cylinders are made of A temporary permit to conduct torch operations is valid from A hot work permit is required for A spark producing tool Soldering and brazing temperatures are typically Oxy-Acetylene can generate a temperature of up to An area exposed to sparks, hot slag, radiant heat, or convective heat as a result of welding is called a A person holding a Certificate of Fitness who is trained and responsible for maintaining a fire watch is known as a Most fires are the result of What should you do if ice buildup occurs on the gas cylinder itself? If a Certificate of Fitness holder discovers that an oxygen regulator is defective, they should If a gas container is unmarked, the certificate of fitness holder should What tank condition would be cause to remove it from service? A control valve should be Persons conducting Torch Operations must possess a current A rapid, persistent chemical reaction that releases heat and light, especially the burning of a combustible substance in the presence of oxygen. A class B fire extinguisher fights fires from A written statement issued by the commissioner certifying that the person to whom it is issued has passed an examination as to his or her qualifications or is otherwise deemed qualified to use or supervise the storage, handling and use of a material What type of fire is a Class A fire extinguisher used on? An example of a flammable material would be Fire extinguishers must be maintained by a W-96 Certificate of Fitness holder every A type D fire involves A type of clothing that should not be worn when performing torch operations is A flame going out unexpectedly and creating a popping sound is known as When a cutting or welding flame burns inside a torch is known as To check for a leak one should A fire extinguisher must be mounted A work area should be To extinguish a fire How should a gas cylinder be stored? In the case of any fire, Acetylene valves should not be opened more than "SCF" stands for A Certificate of Fitness Holder must keep his or her certificate A Citywide permit is valid for up to A hot work permit is required for A spark producing tool To prevent injury hoses should be The oxygen cylinder A compressed gas container must An area exposed to sparks, hot slag, radiant heat, or convective heat as a result of welding is called a Fuel gas or oxygen containers in storage must be separated from any combustible materials by a minimum distance of Most fires are the result of Sparks and pieces of hot metal are the source of ignition in about______ of fires in industrial occupancies. Under no circumstances can hot work be performed within _____ feet of flammable or explosive materials. If torch operation is to be discontinued for a period of ___________, the torch valve must be closed and the gas supply to the torch must be completely shut. A torch should be ignited by using a Why should oil or grease not be used near oxygen? How long is a site permanent specific permit to store flammable gases valid for? How many Fire Guards are required on a job site that has 3 torches in operation? Portable LPG containers greater than ______ must not be stored in residential occupancies. . An oxygen cylinder may store gas at pressure up to A Responsible Person is one who is A designated Hot Work area must be at least_______ feet away from combustible materials. For all Hot Work, inspections must be completed_______ after completion of torch operations. A minimum ___________ rating Fire Extinguisher must be readily accessible within ________ of the hot work location for torch operations. For a Torch-applied Roof System, a minimum ___________ rating Fire Extinguisher must be readily accessible within ________. Empty compressed gas cylinders Panic Bar A type of valve typically used in sprinkler systems Fire Drill shall not be considered a fire Fire Watch Hot Work Torch Applied Roof-System Egress Single Action fire alarm pull station Double Action fire alarm pull station All gas containers and the related equipment . Any single standard portable LPG container must not exceed Any single CNG container must not exceed Permits shall be readily available on the premise for inspection by NFPA stands for Most common fuel gases used in blowtorches are A fire guard is responsible for The pre-hot work check must be conducted by The check reports must be kept at the work site Exhaust fans The workers should
Show more
Read less
Institution
Lehman College
Course
FDNYC G60 (FDNYC_G60)
Whoops! We can’t load your doc right now. Try again or contact support.
Connected book
Written for
- Institution
-
Lehman College
- Course
-
FDNYC G60 (FDNYC_G60)
Document information
- Uploaded on
- April 28, 2023
- Number of pages
- 9
- Written in
- 2022/2023
- Type
- Exam (elaborations)
- Contains
- Questions & answers
Subjects
- fdnyc g60
- all torch operators
- an oxigen fuel
-
torch use of flammable gases g 60
-
fdny certificate of fitness g60 torch use of flammable
-
fdny certificate of fitness g60 torch use of flammable gases
Content preview
$10.19
Get access to the full document:
100% satisfaction guarantee
Immediately available after payment
Both online and in PDF
No strings attached
