Oregon Tattoo (All Correct Answers)

a-bar Correct Answers abbreviation for armature bar aligned Correct Answers armature bar and rear coil should be ____________ more leverage Correct Answers an a-bar extending past rear coil creates _________ 1.5-1.625 Correct Answers usually a longer armature bar is a range from _.___ to _.____ plain steel, no chrome Correct Answers armature bars should be _________ ________, _____ ____________ .010-.012 Correct Answers when a-bar is flat on coil, rear coil has between .___-.___ dust, lint, debris, hitting at an angle Correct Answers what can cause a rattle or deflection of a-bar? (4 things) run hot Correct Answers coils with too much core showing tend to ____ _____ buzz or rattle Correct Answers do not allow the front spring to hang over the rear of the armature bar because it can create a ______ or ___________ contact screws Correct Answers there should be no sharp edges on __________ _______, should be rounded and very smooth faster Correct Answers a short front spring will be _________ rockwell scale Correct Answers all metals are measured on the _________ _______ 48-51 Correct Answers best on the scale for spring stock is ___-___ alcohol Correct Answers can be used to clean your contact area and screws and spring rattle Correct Answers thin, cheap binding posts cause ________ leverage Correct Answers _____________ is a key factor when it comes to a-bar choice 100 Correct Answers copper is ___% conductive