Navy EM1 Advancement Exam 2023 with complete
solution (Administration Section)
The Engineering Department's primary task is to maintain and operate the engineering
plant in a consistently high state of readiness in order to support the ship's primary
mission as an instrument of what?
National Policy
Which type of training, in the form of drills and evolutions, should be augmented with
maintenance and system training?
Operational
What establishes operational procedures?
Technical Guidance
All officers and enlisted personnel assigned duty in connection with supervision,
operation, or maintenance of the engineering plant shall be qualified for such
assignment using Personnel Qualification Standards (PQS) or what else as
implemented per applicable OPNAV, BUPERS and TYCOM instructions?
Job Qualification Requirements (JQRs)
Who assigns the Commanding Officer who will be responsible for the safe and proper
supervision, operation, and maintenance of the engineering plant?
Chief of Naval Personnel (CNP)
What establish the Commanding Officer's authority and Responsibility?
U.S. Navy Regulations
Who is designated as the Integrated Training Team (ITT) Leader and the Damage
Control Training Team (DCTT) Leader?
The Executive Officer (XO)
The Engineering Log shall be hand written in black ink utilizing which forms?
NAVSEA forms 3120/2 A-D
Who supervises placing the ship in the material readiness condition of closure ordered
by the Commanding Officer and ensures that assigned closure classifications are highly
visible?
Damage Control Assistant (DCA)
For ships with assigned Electronic Maintenance Officers (EMOs), the implementation of
Electrical Safety Program may be shared between the Electronic Maintenance Officer
(EMO) and Electrical Officer (EO), but the overall responsibility for the program resides
with whom?
The Electrical Officer (EO)
Which rank at a minimum should the ship's Oil and Water King be who is normally in a
machinery rating?
Petty Officer First Class (E-6)
Who is the primary operator, tester and record keeper for all actions involving F-76/F-
44; main, auxiliary and waste heat boilers; and feed, condensate, and fresh water?
Oil and Water King
Who assists the Engineer Officer and Damage Control Assistant (DCA) in training of
personnel and prevention of fighting of fires?
Fire Marshal
, Who should be knowledgeable, administratively competent person who reports to the
Engineer Officer on all matters pertaining to technical documentation and associated
systems?
The Technical Library Custodian
When provided by the what, the Log Room Yeoman should be assigned solely to the
Engineering Department by the Executive Officer?
Ship's Manning Document (SMD)
What specifies watch station manning requirements for Cold Iron, Auxiliary Steaming
and Condition IV only?
Engineering Department Organization and Regulations Manual (EDORM)
What shall be used in directing or reporting operation of all propulsion plant equipment?
Engineering Operational Sequencing System (EOSS)
What governs deviations from the Engineering Operational Sequencing System?
EOSS Users Guide (EUG)
Instrumentation other than that permanently installed as part of the ship's equipment
shall not be used for control of the propulsion plant unless specifically authorized by
whom?
The Commanding Officer (CO)
Which devices, if installed, shall be used only during periods of authorized training and
removed or de-activated promptly upon conclusion of the training period?
Authorized Onboard Training (OBT)
Who is responsible for the safe and proper operation of the ship's entire engineering
plant, the Engineering watchteam and for the performance of duties prescribed in this
section and by other competent authority?
The Engineering Officer of the Watch (EOOW)
Who is in charge of the watch in the Engineroom/Fireroom?
The Space Supervisor
Who is responsible for operating the main engine throttles following orders received
from the OOD, and as appropriate the EOOW/Engineroom (Space) Supervior?
Engineroom Throttleman
Who is responsible for operating the main engines, ship service generators and
associated auxiliaries?
Engineroom Supervisor
Who is responsible for the vacuum system and that part of the lube oil system controlled
from the upper level and other auxiliary machinery as assigned?
Engineroom Upper Levelman
Who is responsible for those parts of the vacuum and lube oil systems controlled from
the lower level, the condensated pumps, circulating pumps, and other auxiliary
machinery assigned by the Engineroom supervisor?
Engineroom Lower Levelman
Who is responsible for recording hourly reading of operating machinery and for other
duties as assigned by the Engineroom (Space) Supervisor?
Engineroom Messenger
Which watch is responsible for operating ship service generators, associated auxiliary
machinery, and other duties as assigned by the Space Supervisor/EOOW?
Ships Service Turbine Generator (SSTG)
solution (Administration Section)
The Engineering Department's primary task is to maintain and operate the engineering
plant in a consistently high state of readiness in order to support the ship's primary
mission as an instrument of what?
National Policy
Which type of training, in the form of drills and evolutions, should be augmented with
maintenance and system training?
Operational
What establishes operational procedures?
Technical Guidance
All officers and enlisted personnel assigned duty in connection with supervision,
operation, or maintenance of the engineering plant shall be qualified for such
assignment using Personnel Qualification Standards (PQS) or what else as
implemented per applicable OPNAV, BUPERS and TYCOM instructions?
Job Qualification Requirements (JQRs)
Who assigns the Commanding Officer who will be responsible for the safe and proper
supervision, operation, and maintenance of the engineering plant?
Chief of Naval Personnel (CNP)
What establish the Commanding Officer's authority and Responsibility?
U.S. Navy Regulations
Who is designated as the Integrated Training Team (ITT) Leader and the Damage
Control Training Team (DCTT) Leader?
The Executive Officer (XO)
The Engineering Log shall be hand written in black ink utilizing which forms?
NAVSEA forms 3120/2 A-D
Who supervises placing the ship in the material readiness condition of closure ordered
by the Commanding Officer and ensures that assigned closure classifications are highly
visible?
Damage Control Assistant (DCA)
For ships with assigned Electronic Maintenance Officers (EMOs), the implementation of
Electrical Safety Program may be shared between the Electronic Maintenance Officer
(EMO) and Electrical Officer (EO), but the overall responsibility for the program resides
with whom?
The Electrical Officer (EO)
Which rank at a minimum should the ship's Oil and Water King be who is normally in a
machinery rating?
Petty Officer First Class (E-6)
Who is the primary operator, tester and record keeper for all actions involving F-76/F-
44; main, auxiliary and waste heat boilers; and feed, condensate, and fresh water?
Oil and Water King
Who assists the Engineer Officer and Damage Control Assistant (DCA) in training of
personnel and prevention of fighting of fires?
Fire Marshal
, Who should be knowledgeable, administratively competent person who reports to the
Engineer Officer on all matters pertaining to technical documentation and associated
systems?
The Technical Library Custodian
When provided by the what, the Log Room Yeoman should be assigned solely to the
Engineering Department by the Executive Officer?
Ship's Manning Document (SMD)
What specifies watch station manning requirements for Cold Iron, Auxiliary Steaming
and Condition IV only?
Engineering Department Organization and Regulations Manual (EDORM)
What shall be used in directing or reporting operation of all propulsion plant equipment?
Engineering Operational Sequencing System (EOSS)
What governs deviations from the Engineering Operational Sequencing System?
EOSS Users Guide (EUG)
Instrumentation other than that permanently installed as part of the ship's equipment
shall not be used for control of the propulsion plant unless specifically authorized by
whom?
The Commanding Officer (CO)
Which devices, if installed, shall be used only during periods of authorized training and
removed or de-activated promptly upon conclusion of the training period?
Authorized Onboard Training (OBT)
Who is responsible for the safe and proper operation of the ship's entire engineering
plant, the Engineering watchteam and for the performance of duties prescribed in this
section and by other competent authority?
The Engineering Officer of the Watch (EOOW)
Who is in charge of the watch in the Engineroom/Fireroom?
The Space Supervisor
Who is responsible for operating the main engine throttles following orders received
from the OOD, and as appropriate the EOOW/Engineroom (Space) Supervior?
Engineroom Throttleman
Who is responsible for operating the main engines, ship service generators and
associated auxiliaries?
Engineroom Supervisor
Who is responsible for the vacuum system and that part of the lube oil system controlled
from the upper level and other auxiliary machinery as assigned?
Engineroom Upper Levelman
Who is responsible for those parts of the vacuum and lube oil systems controlled from
the lower level, the condensated pumps, circulating pumps, and other auxiliary
machinery assigned by the Engineroom supervisor?
Engineroom Lower Levelman
Who is responsible for recording hourly reading of operating machinery and for other
duties as assigned by the Engineroom (Space) Supervisor?
Engineroom Messenger
Which watch is responsible for operating ship service generators, associated auxiliary
machinery, and other duties as assigned by the Space Supervisor/EOOW?
Ships Service Turbine Generator (SSTG)
