SPēD PSC (Physical Security Certification) - Study Guide Already Passed

SPēD PSC (Physical Security Certification) - Study Guide Already Passed Which two lamp types last the longest? 1. Induction 2. Solid state What term is used for measuring output of light (lumens) compared to power input (watts)? Lamp efficacy What term refers to the need for lamps to be as efficient as possible to save costs and energy? Lamp efficacy When "light source" or "bulb" is used, what is referring to? A lamp True or false? Creating stripes on walls with lighting inhibits natural recognizable breaks in outlines or silhouettes that help security forces to detect unauthorized persons. False What should you do AFTER lighting systems have been installed? 1. Implement a planned maintenance program 2. Conduct periodic inspections Glare projection lighting, controlled lighting, and surface lighting are methods of which type of lighting? Continuous lighting Which type of lighting is manually operated, can be lit as needed, and is typically used at areas like construction sites? Portable lighting What type of lamp are light emitting diodes, or LEDs? Solid state lighting (SSL) Which policy guidance contains the minimum standards and criteria for the physical security, including exterior security lighting, of DoD sensitive conventional Arms, Ammunition, and Explosives (AA&E)? DoD Manual 5100.76, Physical Security of Sensitive Conventional Arms, Ammunition, and Explosives What term is used when light from one area spills over into an adjoining area? Light trespass What type of building-mounted light fixture provides low-wattage lighting with a tighter beam control and low brightness to control light trespass and glare? Cut-off type What type of fixture is generally used on highways and streets? Refractor light fixture The purpose of security lighting is to____________. Deter and detect intruders What term is used to refer to the consistency of lighting? Light uniformity What types of lamps should be used with pole-mounted light fixtures in housing areas on DoD installations? 1. LED 2. Fluorescent 3. Metal halide What should you consider when designing exterior lighting systems on DoD installations and facilities? 1. Costs of operating older lamps/fixtures versus the cost of lamp replacement 2. Maintenance costs of cleaning fixtures What type of lighting is typically used during a power failure because it can be powered by a generator or battery? Emergency lighting Which type of lamp has an average rated life of 100,000 hours or more? Induction Which type of fencing perimeter should you use glare projection lighting? Isolated fence perimeter What may cause the security forces to not to be able to see contrast and details of intruders? Direct glare What is generally used on pedestrian walkways? Controlled and Uncontrolled post-top fixtures What type of light produces optical radiation? Lamp Which combination best reflects the lighting that should be used for vehicle access zones at access control points? Cutoff lights in canopy with light-emitting diode (LED), induction, fluorescent, or metal halide lamps