Hazmat_Ops_Test_3

Hazmat_Ops_Test_3Which of the following is not a response objective for hazardous material incidents? a. Leak control b. Rescue c. Recovery d. Reporting Reporting If mitigation efforts are failing or the situation is getting worse, the: a. Original plan must be reevaluated and possibly revised. b. Original plan should be discarded and a new plan developed. c. Original plan should be continued as originally developed until incident end. d. Incident should be considered a loss and evacuation procedures initiated. Original plan must be reevaluated and possibly revised. What level of training is required to don chemical protective clothing? a. Firefighter I b. First Responder c. Haz Mat Awareness d. Haz Mat Operations Haz Mat Operations The statement, "Keep Away From Children," is found on a pesticide label. This is an example of a(n): a. Precautionary statement b. Incompatibility statement c. Pest control warning statement d. Signal word statement precautionary statement The statement, "Keep Away from Waterways," is found on a pesticide label. This statement is referred to as a(n): a. Signal word b. Hazard statement c. Pest control product warning d. Incompatibility statement Hazard statement A+ The transport container on which you would expect to find a specification plate is known as a: a. Cargo tank truck b. Rail car c. Aircraft transport container d. All of the above Cargo tank truck While enroute to an emergency incident, dispatch informs you that callers are reporting a tank leaking an unknown liquid. Dispatch also informs you that witnesses report seeing a marking of "Spec. 51" on the side of the tank. Which of the following types of containers would you expect to find on arrival at the incident? a. Cargo tank b. Rail car c. Intermodal portable tank d. Radioactive container Intermodal portable tank A recon team is sent to observe a tank truck that has rolled over. The team reports that the vehicle is an MC 312. The container most probably contains a: a. Flammable liquid b. Corrosive liquid c. Poison gas d. Flammable solid Corrosive liquid An MC 307/DOT 407 low-pressure chemical carrier is designed to carry chemicals with pressures not to exceed _____ psi. a. 3.0 b. 75.0 c. 40.0 d. 30.0 40.0 A tank carrier designed to carry flammable liquids, combustible liquids, Class B poisons, and liquid food products with vapor pressures up to 3 psi, is an: a. MC 306/DOT 406 b. MC 307/DOT 407 c. MC 312/DOT 412 d. MC 331/DOT 407 A+ MC 306/DOT 406 A noninsulated, single-shell vessel illustrated below, which carries gases that have been liquefied, is an: a. MC 306/DOT 406 b. MC 307/DOT 407 c. MC 312/DOT 412 d. MC 331 MC 331 A cryogenic material would be carried in an: a. MC 306/DOT 406 b. MC 307/DOT 407 c. MC 331 d. MC 338 MC 338 The shape of this container that is located at a fixed facility would indicate it probably contains a: a. Cryogenic b. Solid waste c. Poison gas d. Combustible liquid Cryogenic The shipping of radioactive materials in a metal drum is considered a Type _____ packaging. a. A b. B c. C d. D A A carboy may be used for transporting materials containing: a. Radioactive materials b. Corrosives c. Explosives d. Poison gases Corrosives A+ The proper cargo tank truck to carry a shipment of sulfuric acid is an: a. MC 306/DOT 406 b. MC 307/DOT 407 c. MC 312/DOT 412 d. MC 331 MC 312/DOT 412 Pipeline markers contain information describing the transported commodity and the name and telephone number of the carrier. a. True b. False True A _____ cargo tank has an inner tank with an outer shell, and is well insulated. a. Flammable liquid b. Cryogenic c. Combustible liquid d. Acid Cryogenic A cryogenic liquid tank car will have: a. A single un-insulated shell. b. An enclosed dome. c. A double shell with insulation. d. Fittings and valves visible on top of the tank car. A double shell with insulation. A rail car with a stenciled name on its side is generally a: a. Coded car b. Pressurized car c. Dedicated car d. Gas-carrying car Dedicated car A+ If a rail car had a cylindrical tank and a covered dome containing all fittings and valves, it would be classified as a _____ rail car. a. Nonpressure b. Cryogenic liquid tank c. Pressure tank d. Dry bulk tank Pressure