Ammo CDC's set B (good one) 253 QUESTIONS WITH COMPLETE SOLUTIONS

Before using an electric drill, what is the first thing you should do? CORRECT ANSWERS: Make sure the diameter of the hole to be drilled is within the capacity of the drill The purpose of cutting lubricant in most drilling ops is to increase the CORRECT ANSWERS: Drilling speed and drill bit life Minimum protection using a bench grinder CORRECT ANSWERS: eye and face protection what condition would prevent an operator from applying power to a hoist or other powered lifting device CORRECT ANSWERS: an AF Form 979 most common type of lifting sling CORRECT ANSWERS: wire rope the enunciators displayed on the fluke 8025 series multimeter are used to distinguish among CORRECT ANSWERS: ohms, kilohm, and megohms 2 operational modes of the Fluke 8025 CORRECT ANSWERS: range and hold the steering system on the MHU 141/ M trailer has a turning radius of how many inches CORRECT ANSWERS: 200 When the MHU 141 trailer is loaded or towed with the hinged deck panels open, what must be done? CORRECT ANSWERS: the deck supports must be properly positioned and locked in place with quick release pins Max load capacity of the MHU 110/ M trailer CORRECT ANSWERS: 15,000 the parking brake on the MHU 110/ M is applied by CORRECT ANSWERS: pulling either one of two hand levers located on each side of the front of trailer how many openings are on the deck of the MHU- 226 trailer CORRECT ANSWERS: 3 what type of steering aids the MHU- 226 CORRECT ANSWERS: four wheeled double ackerman After 463L pallets are positioned on a rollerized trailer, what can you use to secure the pallets CORRECT ANSWERS: MB-1 chain assemblies and or tie down straps what kind of movements supports on base activities to or from the flightline CORRECT ANSWERS: operational what munitions item is not loaded into transport modules by munitions