FSVO state test | 50 Questions with 100% Correct Answers | Verified

The purpose of using a spotter is to - ANS - the driver by observing cross traffic the as the area in the blind spot horizontal and vertical openings, the operator must know: To effectively judge the ability of a vehicle to pass through areas of restricted - ANS - vehicle dimensions. Which driving skill would not require using a spotter? - ANS - Diminishing clearance The distance a vehicle travels from the point where you begin recognizing the hazard until the apparatus comes to a complete stop is called the: - ANS - total stopping distance. The confined space turnaround maneuver allows an operator to turn the apparatus degrees - ANS - 180 Improper tire pressures may cause - ANS - poor handling One method of performing an apparatus/pretrip inspection is the - ANS - walk-around method. Before shutdown the apparatus engine temperature should be allowed to stabilize by idling it for minutes. - ANS - 3 to 5 Checking for voltage, electrolyte level, and corrosion are all steps in inspecting: - ANS - the battery. While traveling in the center lane of a multiple-lane highway on an emergency call, the vehicle in front of you stops. You should: - ANS - brake to reduce speed and pass on the left side of the vehicle. The vacuum test requires a reading at the end of 5 minutes with no more than inches of vacuum being lost. - ANS - 10