EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) Q&A 2027 |INSTANT
DOWNLOAD PDF
1. What is the primary responsibility of a structural inspector?
A. Design the building's architectural appearance B. Verify that
structural construction complies with approved plans and
applicable codes C. Determine the property's market value D.
Select the building owner’s contractor
Correct Answer: B. Verify that structural construction complies
with approved plans and applicable codes.
Rationale: Structural inspectors verify that structural
components, materials, connections, and construction methods
meet approved plans and applicable building requirements.
2. Which building component transfers structural loads from
the structure into the ground?
A. Roof covering B. Exterior siding C. Foundation D. Interior
finish
Correct Answer: C. Foundation.
Rationale: Foundations distribute building loads safely into
supporting soil or rock.
3. What is a dead load?
,A. The weight of permanent building components B. The weight
of temporary construction workers only C. Wind pressure on a
building D. Earthquake forces
Correct Answer: A. The weight of permanent building
components.
Rationale: Dead loads include permanent structural members,
roofing, flooring, walls, and permanently installed equipment.
4. Which of the following is considered a live load?
A. Concrete foundation weight B. Structural steel beam weight
C. Permanent masonry wall weight D. Occupants and movable
furniture
Correct Answer: D. Occupants and movable furniture.
Rationale: Live loads are variable loads caused by people,
furniture, stored materials, and other movable items.
5. What is the purpose of a footing?
A. Provide decorative support B. Distribute structural loads over
supporting soil C. Prevent all moisture from entering a building
D. Support electrical wiring
Correct Answer: B. Distribute structural loads over supporting
soil.
Rationale: Footings spread concentrated structural loads over a
sufficient soil area to reduce excessive bearing pressure and
settlement.
,6. What does soil bearing capacity describe?
A. The soil's ability to support applied loads B. The color of the
soil C. The soil's moisture content only D. The temperature of
the ground
Correct Answer: A. The soil's ability to support applied loads.
Rationale: Soil bearing capacity indicates the pressure that
supporting soil can safely resist under foundation loads.
7. Why is reinforcing steel installed in concrete?
A. To reduce concrete density B. To make concrete waterproof
C. To improve resistance to tensile forces D. To eliminate the
need for foundations
Correct Answer: C. To improve resistance to tensile forces.
Rationale: Concrete performs well in compression but is
relatively weak in tension. Reinforcing steel helps resist tensile
stresses.
8. What should an inspector verify before concrete is poured
into reinforced footings?
A. Interior paint color B. Roof ventilation C. Window dimensions
D. Reinforcement size, spacing, placement, and required
concrete cover
Correct Answer: D. Reinforcement size, spacing, placement, and
required concrete cover.
, Rationale: Reinforcement must be correctly positioned and
supported to achieve the required structural performance and
durability.
9. What is the primary purpose of concrete formwork?
A. Provide permanent electrical protection B. Hold fresh
concrete in the required shape until it gains sufficient strength
C. Increase the building's roof area D. Prevent all foundation
settlement
Correct Answer: B. Hold fresh concrete in the required shape
until it gains sufficient strength.
Rationale: Formwork supports and shapes fresh concrete
during placement and initial curing.
10. What does concrete curing accomplish?
A. Promotes hydration and strength development B. Removes
all reinforcing steel C. Reduces foundation depth D. Eliminates
the need for concrete testing
Correct Answer: A. Promotes hydration and strength
development.
Rationale: Proper curing maintains suitable moisture and
temperature conditions for cement hydration and concrete
strength development.
11. What is the purpose of a structural beam?