Mp100 Cycle 3 Study Guide Expected Questions With Verified Answers

MP100 CYCLE 3 STUDY GUIDE EXPECTED QUESTIONS
WITH VERIFIED ANSWERS

Question 1.
What are the four method questions AND answers for the Neotek Elite?

ANSWER
1. What inputs does the console offer?

Answer:
1. Mic Input.....
2. Line Input......
3. Bus Input

--------------------------------------------------------2. How do I access any input into any
fader?

Answer:
The input selector switches above and below the S-curve -------------------------------------
-------------------3. Which console inputs are the outputs of the MTR connected to?

Answer:
Line Inputs

--------------------------------------------------------4. How do I direct the output of any
fader to the MTB(Multitrack bus) or Stereo Bus.

Answer:
The Rev button. This buttons function is output reversal


Question 2.
When in normal tracking mode (with no buttons pressed) on the Neotek, where does the Fader fader
output to?
ANSWER
Multitrack Bus




1/6

, Question 3.
When in normal tracking mode (with no buttons pressed) on the Neotek, where does the Monitor
fader output to?

ANSWER
Stereo Bus


Question 4.
To switch to
"Mix Mode" on the Neotek, with all the Fader faders being used as tape return faders, which button(s)
need to be pressed on each I/O?

ANSWER
1. Rev and Line below the S-curve
2. Post, fader, fader, fader in aux section


Question 5.
Which Neotek patch bay row has the outputs/inputs of the digital multitrack machine (the Pro Tools
system)?

ANSWER
Row 4


Question 6.
When patching from the OUTPUT of the Multitrack Busses on the Neotek, will you be patching out of
the TOP or the BOTTOM of the patch row?
ANSWER
The Top
(This is because rows 1-6 are outputs over inputs, and rows 7 & 8 are inputs over outputs)


Question 7.
Which channels on the Neotek at the Conservatory offer a Direct Output?

ANSWER
27-32




2/6