Maritime Question and answer 100%
correct 2026/2027
Merchant Shipping, Shipbreaking, Marine Construction, and Offshore Work are all ______________. -
correct answer Maritime Industries
Under State programs and Under Federal programs - correct answer Split Jurisdiction
Marine terminals shoreside operations are under - correct answer OSHA Jurisdiction
GENERAL standards which apply to any employers in MULTIPLE industries - correct answer Horizontal
Standards
SPECIFIC standards which apply to employers in a specific industry - correct answer Vertical Standards
What is the Tool Bag Directive in Shipyard employment - correct answer Shipyard employment (CPL-02-
00-142)
What are Imminent danger, Fatalities & Catastrophes, Complaints & Referrals; and Programmed part of?
- correct answer Inspection Priorities
The four points listed below are what type of violation: 1. Type of Hazardous exposure, 2. type of injury
or illness, 3. potential for death or serious physical harm, and 4. Knowledge of hazardous condition -
correct answer Serious Violations
What is the first thing to consider if an incident is recordable - correct answer Did the employee
experience and injury or illness
, Recordable work related injury musht be recorded within______. - correct answer 7 days
Rule on applicability for shipyards is that, unless 1915 standards specifically address a category of
requirement, the requirements of 1910 (General Industry) would apply (unless 1910 specifically
excludes shipyards) - correct answer 1915
The employer is responsible for inspecting and maintanining the records for at least________- - correct
answer 3 months
The responsibility for compliance with the 1915.4 regulations of this part is placed upon
_____________. - correct answer Employer
A compartment of small size and limited access that can readily create or aggravate a hazardous
exposure - correct answer Confined space
Any space, other than a confined space, which is enclosed by bulkheads and overhead - correct answer
Enclosed space
Borders a subject space in all directions - correct answer Adjacent space
Label the area with "Not safe for Hot workers" and Not safe for Hot Work" when the concentration is
equal to or greater than ________ of LEL - correct answer 10%
The progress of the vessel construction during shipbuilding operations, depends on the testing by a
____________ and _________ - correct answer Competent Person (CP); Certified Marine Chemist
(CMC)
What device is needed on the nozzle end during abrasive blasting? - correct answer A dead man control
correct 2026/2027
Merchant Shipping, Shipbreaking, Marine Construction, and Offshore Work are all ______________. -
correct answer Maritime Industries
Under State programs and Under Federal programs - correct answer Split Jurisdiction
Marine terminals shoreside operations are under - correct answer OSHA Jurisdiction
GENERAL standards which apply to any employers in MULTIPLE industries - correct answer Horizontal
Standards
SPECIFIC standards which apply to employers in a specific industry - correct answer Vertical Standards
What is the Tool Bag Directive in Shipyard employment - correct answer Shipyard employment (CPL-02-
00-142)
What are Imminent danger, Fatalities & Catastrophes, Complaints & Referrals; and Programmed part of?
- correct answer Inspection Priorities
The four points listed below are what type of violation: 1. Type of Hazardous exposure, 2. type of injury
or illness, 3. potential for death or serious physical harm, and 4. Knowledge of hazardous condition -
correct answer Serious Violations
What is the first thing to consider if an incident is recordable - correct answer Did the employee
experience and injury or illness
, Recordable work related injury musht be recorded within______. - correct answer 7 days
Rule on applicability for shipyards is that, unless 1915 standards specifically address a category of
requirement, the requirements of 1910 (General Industry) would apply (unless 1910 specifically
excludes shipyards) - correct answer 1915
The employer is responsible for inspecting and maintanining the records for at least________- - correct
answer 3 months
The responsibility for compliance with the 1915.4 regulations of this part is placed upon
_____________. - correct answer Employer
A compartment of small size and limited access that can readily create or aggravate a hazardous
exposure - correct answer Confined space
Any space, other than a confined space, which is enclosed by bulkheads and overhead - correct answer
Enclosed space
Borders a subject space in all directions - correct answer Adjacent space
Label the area with "Not safe for Hot workers" and Not safe for Hot Work" when the concentration is
equal to or greater than ________ of LEL - correct answer 10%
The progress of the vessel construction during shipbuilding operations, depends on the testing by a
____________ and _________ - correct answer Competent Person (CP); Certified Marine Chemist
(CMC)
What device is needed on the nozzle end during abrasive blasting? - correct answer A dead man control
