FDOT Asphalt Paving Level 2 Updated 2026

FDOT Asphalt Paving Level 2 Study Guide 2026 | Expert-Verified Solutions What makes up a quality asphalt mixture? - answer - A quality asphalt mixture is determined by the constructability, if it conforms to Specifications, and if it satisfies functional requirements. CQC - answer - contractor quality control Superpave - answer - Asphalt mix design system since 1998 QCP - answer - Quality control plan QCM - answer - Quality control Manual QC - answer - Quality Control (Contracting Testing and Inspection) VT - answer - Verification Testing (FDOT or CEI Verification) CEI - answer - Construction Engineering and Inspection RT - answer - Resolution Testing (FDOT) IV - answer - Independent Verification Testing IA - answer - Independent Assurance Testing The decision-making authority on a job needs to be given to who? - answer - Needs to be given to the level closet to the work as specified in the specifications. It ensure a quick handle on situations and issues. The governing order of project documents from high (1) to low (7) starts with the highest being - answer - Special Provisions The governing order of project documents from high to low (2) - answer - Technical Special Provisions The governing order of project documents from high to low (3) - answer - Plans The governing order of project documents from high to low (4) - answer - Road design, structures, and traffic operations standards The governing order of project documents from high to low (5) - answer - Developmental Specifications The governing order of project documents from high to low (6) - answer - Supplemental Specifications The governing order of project documents from high to low (7) - answer - Standard Specifications What are the key components in a pre-paving conferences? - answer - Key Personnel (Paving superintendent) Contractor Input Agency Input QC Plan Review Discuss more specific key topics or issues Meeting Minutes Action items (what to do in situations, who to call) What are the key components in a pre-construction conferences? - answer - Agency Input (FDOT) Contractor Input (Including the Prime) Project Personnel (Upper - Middle management) Testing Safety Utilities Cities or Municipalities (HOA, school boards) Suppliers What causes the compactive effort increase? - answer - Crushed aggregate content Nominal maximum size Hardness of the aggrergate Angularity of aggregate Less natural sand High dust content mixes Gradation of the mix greatly affects compaction Superpave mixes What kind of Performance Graded binders are there? - answer - PG 67-22 (old AC-30) PG 52-82 PG 58-22 PG 76-22 (PMA) Polymer modified asphalt PG 76-22 (ARB) Asphalt rubber binder PG 82-22 (PMA) polymer modified asphalt What are PG binders tested for high temperature wise? - answer - A 7 day max pavement temp of 67C What are PG binders tested for low temperature wise? - answer - -22C Friction course has what PG binders in its makeup? - answer - PG 76-22 (PMA) PG 76-22 (ARB) PG 82-22 (PMA) Asphalt cement does what while hot? - answer - Acts as a lubricant Asphalt cement does what while cold? - answer - It becomes a glue and holds the rocks together PG 76-22 (PMA) is especially good at what? - answer - Reducing rutting. What is an asphalt treated permeable base? - answer - Concrete placed over asphalt Friction course mixes uses a what kind of aggregate? - answer - A polish resistant aggregate What is a polish resistant aggregate? - answer - Oolitic limestone (Miami-Dade County) Granite (Georgia, Alabama, Nova Scotia) Other Approved Sources Asphalt generally has a minimum thickness to be laid at but what determines how thick? - answer - The plans developed by the designer does What is the difference between Superpave mixes and Friction Course mixes? - answer - Polish resistant aggregate and special PMA or ARB binders are used in friction course mixes. A shoulder less than 5 ft with FC-5 can not have what? - answer - A joint. Pave the outside of the mainlin