IICRC WRT GUARANTEED PASS !!
The most important aspect to any job is: - (ANSWER)Risk/Hazard assessment for the safety of all
individuals involved
Safety in water damage restoration includes: - (ANSWER)Engineering controls, Immunizations from a
Primary care physician, and PPE
Employers must provide which of the following to any employee working in a repirator: -
(ANSWER)Medical evaluation, Fit test, and training
Water damage mitigation services do not start until - (ANSWER)A work authorization (contract) has
been signed
During the initial inspection when looking for areas impacted by water damage: - (ANSWER)Check all
areas that could potentially be affected
Often found in older structres, lead and asbestos are hazardous materials regulated by the Federal
Government (true or False) - (ANSWER)True
The Category of water refers to the range of contamination in water considering both its originating
source and its quality after contacting materials on the jobsite. (True or False) - (ANSWER)True
Water that has significant degree of contamination and could cause illiness is: - (ANSWER)Category 2
Water that is grossly contaminated is: - (ANSWER)Category 3
If stopped from removing highly porous materials (e.g. carpet) on a Category 3 job, what should a
restorer do? - (ANSWER)Stop work to prevent liability
Water that contains diesel fuel is: - (ANSWER)regulated, Hazardous Materials or Mold
Page 1 of 10
, The three types of damage a tchnician needs to identify, document, and communicate to materially
interested parties are: - (ANSWER)Pre-existing, primary, and secondary
Secondary damage are more likely to occur when relative humidity levels are: - (ANSWER)55%
Performing a thorough extraction or multiple extractions.... - (ANSWER)Reduces drying times
Water extracted from a jobsite should be... - (ANSWER)Disposed of according to local laws
In a basement that measures 25' x 30' and has water standing at a depth of 9", how many gallons total
are there? - (ANSWER)4,208 gallons 25 x 30 x (9/12 = 0.75) x 7.481
In a crawlspace that measures 12' x 15' and has water standing at a depth of 5'3", how many total
gallons of water is there? - (ANSWER)12 x 15 x (5'3" = 5 3/12 = 5.25) x 7.481= 7,069 gallons
A moisture reading obtained from an unaffected material that allows the restorer to set drying goals for
the affected structure is the___ - (ANSWER)Dry standard
When is a drying job done? - (ANSWER)A moisture meeter indicates we have met our dry goal
The moisture sensor can be used to verify our drying goal has been met (True or False) - (ANSWER)False
Moisture sensors and IR cameras are effective tools for: - (ANSWER)quickly locating moisture in carpet
and pad and establishing a wet perimeter.
What does a thermo-hygrometer measure? - (ANSWER)Temperature and relative humidity
When do (IR) infrared cameras indicate possible moisture in materials? - (ANSWER)Materials surface
temperature cools as water evaporates. Moisture in materials can cause temperature variations due to
differences in thermal conductivity.
Page 2 of 10
The most important aspect to any job is: - (ANSWER)Risk/Hazard assessment for the safety of all
individuals involved
Safety in water damage restoration includes: - (ANSWER)Engineering controls, Immunizations from a
Primary care physician, and PPE
Employers must provide which of the following to any employee working in a repirator: -
(ANSWER)Medical evaluation, Fit test, and training
Water damage mitigation services do not start until - (ANSWER)A work authorization (contract) has
been signed
During the initial inspection when looking for areas impacted by water damage: - (ANSWER)Check all
areas that could potentially be affected
Often found in older structres, lead and asbestos are hazardous materials regulated by the Federal
Government (true or False) - (ANSWER)True
The Category of water refers to the range of contamination in water considering both its originating
source and its quality after contacting materials on the jobsite. (True or False) - (ANSWER)True
Water that has significant degree of contamination and could cause illiness is: - (ANSWER)Category 2
Water that is grossly contaminated is: - (ANSWER)Category 3
If stopped from removing highly porous materials (e.g. carpet) on a Category 3 job, what should a
restorer do? - (ANSWER)Stop work to prevent liability
Water that contains diesel fuel is: - (ANSWER)regulated, Hazardous Materials or Mold
Page 1 of 10
, The three types of damage a tchnician needs to identify, document, and communicate to materially
interested parties are: - (ANSWER)Pre-existing, primary, and secondary
Secondary damage are more likely to occur when relative humidity levels are: - (ANSWER)55%
Performing a thorough extraction or multiple extractions.... - (ANSWER)Reduces drying times
Water extracted from a jobsite should be... - (ANSWER)Disposed of according to local laws
In a basement that measures 25' x 30' and has water standing at a depth of 9", how many gallons total
are there? - (ANSWER)4,208 gallons 25 x 30 x (9/12 = 0.75) x 7.481
In a crawlspace that measures 12' x 15' and has water standing at a depth of 5'3", how many total
gallons of water is there? - (ANSWER)12 x 15 x (5'3" = 5 3/12 = 5.25) x 7.481= 7,069 gallons
A moisture reading obtained from an unaffected material that allows the restorer to set drying goals for
the affected structure is the___ - (ANSWER)Dry standard
When is a drying job done? - (ANSWER)A moisture meeter indicates we have met our dry goal
The moisture sensor can be used to verify our drying goal has been met (True or False) - (ANSWER)False
Moisture sensors and IR cameras are effective tools for: - (ANSWER)quickly locating moisture in carpet
and pad and establishing a wet perimeter.
What does a thermo-hygrometer measure? - (ANSWER)Temperature and relative humidity
When do (IR) infrared cameras indicate possible moisture in materials? - (ANSWER)Materials surface
temperature cools as water evaporates. Moisture in materials can cause temperature variations due to
differences in thermal conductivity.
Page 2 of 10
