AVIXA CTS Comprehensive Resource To Help You Ace 2026-
2027 Exams Includes Frequently Tested Questions With
Elaborated 100% Correct Complete Solutions
Guaranteed Pass First Attempt!! Current Update!!
1. During an initial site survey, it is noted that there are no window treatments on
the windows of the planned project room, potentially causing excessive glare.
What should be done to address this issue?
a. Proceed with the survey and note the issue in the survey report without taking
any further action.
b. Recommend installing window treatments to the client to mitigate glare issues.
c. Ignore the glare issue as it falls outside the scope of the AV project.
d. Cancel the survey and reschedule it for a time when window treatments are
installed to accurately assess the room conditions. - CORRECT ANSWER b.
Recommend installing window treatments to the client to mitigate glare issues.
2. Projectors may use different lamp technologies for different reasons. For long
life without changing the light source, which technology is preferred?
a. Halogen lamp
b. Fluorescent lamp
c. LED lamp
d. Arc lamp - CORRECT ANSWER c. LED lamp
3. A client requires a front projection system. What drawings should be requested
from the client to select the appropriate lens?
,a. Reflected ceiling plans and elevations.
b. Building section and millwork details.
c. Floor plans and wall details.
d. Structural and electrical plans. - CORRECT ANSWER a. Reflected ceiling plans
and elevations.
4. While inspecting the project site, a noisy fan coil unit is found in the ceiling
area of the north wall. How should this issue be addressed during the initial site
survey?
a. Proceed with the survey and make a note of the noisy fan coil unit for potential
mitigation measures during the installation phase.
b. Take appropriate measurements and inform the client in writing so they can
understand the impact the noisy fan coil unit will have on the AV project.
c. Ignore the noisy fan coil unit as it is not directly related to the AV installation
process.
d. Immediately halt the survey and inform the client about the noisy fan coil unit,
recommending further assessment and repair before proceeding with the project.
- CORRECT ANSWER b. Take appropriate measurements and inform the client in
writing so they can understand the impact the noisy fan coil unit will have on the
AV project.
5. During an initial site survey, what type of information should be documented
regarding the project room's ceiling?
a. Type of ceiling material and structure.
b. Color of the ceiling paint.
c. Number of tiles in the ceiling.
,d. The presence of furniture on the ceiling. - CORRECT ANSWER a. Type of ceiling
material and structure.
6. A drawing that represents a top-down perspective of a space or object, showing
the layout and arrangement of features as seen from above is also known as a
_____.
a. Plan view
b. Elevation
c. Title block
d. Detail drawing - CORRECT ANSWER a. Plan view
7. When surveying a job site before the start of a project, which of the following is
LEAST important?
a. The hours of the loading dock.
b. The size of the freight elevator.
c. The material of the conference room walls.
d. The color of the conference room walls. - CORRECT ANSWER d. The color of the
conference room walls.
8. While reviewing logistical information during a Site Survey visit, it is discovered
that no work can start until the project team completes mandatory safety training,
which takes 4 to 6 weeks to schedule. What would be the most appropriate
course of action in this situation?
a. Proceed with the site survey and commence work, assuming the training can be
completed concurrently.
, b. Inform the client about the training requirement and request an extension of
the project timeline.
c. Conduct the site survey and begin work, ignoring the training requirement to
meet project deadlines.
d. Delay the site survey until after the completion of the training to ensure
compliance with safety regulations. - CORRECT ANSWER d. Delay the site survey
until after the completion of the training to ensure compliance with safety
regulations.
To maximize the quality of projected images in a presentation, the AV designer
should ensure that there is minimal
a. color temperature imbalance between the projected image and the ambient
light
b. other media used in the room except the projected image
c. HDCP fallout
d. ambient light in the display environment - CORRECT ANSWER d. ambient light in
the display environment
Which of the following statements accurately describes the purpose of compiling
information for an AV project scope?
a. To prioritize tasks based on budget constraints.
b. To gather data for the AV project manager's reference.
c. To ensure the proposed system meets the needs of stakeholders.
d. To document the architectural layout of the building. - CORRECT ANSWER c. To
ensure the proposed system meets the needs of stakeholders.
2027 Exams Includes Frequently Tested Questions With
Elaborated 100% Correct Complete Solutions
Guaranteed Pass First Attempt!! Current Update!!
1. During an initial site survey, it is noted that there are no window treatments on
the windows of the planned project room, potentially causing excessive glare.
What should be done to address this issue?
a. Proceed with the survey and note the issue in the survey report without taking
any further action.
b. Recommend installing window treatments to the client to mitigate glare issues.
c. Ignore the glare issue as it falls outside the scope of the AV project.
d. Cancel the survey and reschedule it for a time when window treatments are
installed to accurately assess the room conditions. - CORRECT ANSWER b.
Recommend installing window treatments to the client to mitigate glare issues.
2. Projectors may use different lamp technologies for different reasons. For long
life without changing the light source, which technology is preferred?
a. Halogen lamp
b. Fluorescent lamp
c. LED lamp
d. Arc lamp - CORRECT ANSWER c. LED lamp
3. A client requires a front projection system. What drawings should be requested
from the client to select the appropriate lens?
,a. Reflected ceiling plans and elevations.
b. Building section and millwork details.
c. Floor plans and wall details.
d. Structural and electrical plans. - CORRECT ANSWER a. Reflected ceiling plans
and elevations.
4. While inspecting the project site, a noisy fan coil unit is found in the ceiling
area of the north wall. How should this issue be addressed during the initial site
survey?
a. Proceed with the survey and make a note of the noisy fan coil unit for potential
mitigation measures during the installation phase.
b. Take appropriate measurements and inform the client in writing so they can
understand the impact the noisy fan coil unit will have on the AV project.
c. Ignore the noisy fan coil unit as it is not directly related to the AV installation
process.
d. Immediately halt the survey and inform the client about the noisy fan coil unit,
recommending further assessment and repair before proceeding with the project.
- CORRECT ANSWER b. Take appropriate measurements and inform the client in
writing so they can understand the impact the noisy fan coil unit will have on the
AV project.
5. During an initial site survey, what type of information should be documented
regarding the project room's ceiling?
a. Type of ceiling material and structure.
b. Color of the ceiling paint.
c. Number of tiles in the ceiling.
,d. The presence of furniture on the ceiling. - CORRECT ANSWER a. Type of ceiling
material and structure.
6. A drawing that represents a top-down perspective of a space or object, showing
the layout and arrangement of features as seen from above is also known as a
_____.
a. Plan view
b. Elevation
c. Title block
d. Detail drawing - CORRECT ANSWER a. Plan view
7. When surveying a job site before the start of a project, which of the following is
LEAST important?
a. The hours of the loading dock.
b. The size of the freight elevator.
c. The material of the conference room walls.
d. The color of the conference room walls. - CORRECT ANSWER d. The color of the
conference room walls.
8. While reviewing logistical information during a Site Survey visit, it is discovered
that no work can start until the project team completes mandatory safety training,
which takes 4 to 6 weeks to schedule. What would be the most appropriate
course of action in this situation?
a. Proceed with the site survey and commence work, assuming the training can be
completed concurrently.
, b. Inform the client about the training requirement and request an extension of
the project timeline.
c. Conduct the site survey and begin work, ignoring the training requirement to
meet project deadlines.
d. Delay the site survey until after the completion of the training to ensure
compliance with safety regulations. - CORRECT ANSWER d. Delay the site survey
until after the completion of the training to ensure compliance with safety
regulations.
To maximize the quality of projected images in a presentation, the AV designer
should ensure that there is minimal
a. color temperature imbalance between the projected image and the ambient
light
b. other media used in the room except the projected image
c. HDCP fallout
d. ambient light in the display environment - CORRECT ANSWER d. ambient light in
the display environment
Which of the following statements accurately describes the purpose of compiling
information for an AV project scope?
a. To prioritize tasks based on budget constraints.
b. To gather data for the AV project manager's reference.
c. To ensure the proposed system meets the needs of stakeholders.
d. To document the architectural layout of the building. - CORRECT ANSWER c. To
ensure the proposed system meets the needs of stakeholders.
