AVIXA CTS Comprehensive Resource To Help You Ace Exams Includes Frequently Tested Questions With Elaborated 100% Correct Complete Solutions Guaranteed Pass First Attempt!! Current Update!!

AVIXA CTS Comprehensive Resource To Help You Ace Exams Includes Frequently Tested Questions With Elaborated 100% Correct Complete Solutions Guaranteed Pass First Attempt!! Current Update!! 1. What is the BEST way to determine how reverberant a space is? a) -Clap your hands and listen for an echo b) -Ask the client if anyone has complained that the room is too noisy c) -Use an RT60 meter d) -Use a DB SPL meter - CORRECT ANSWER Use an RT60 meter 2. The correct time to discuss visible finishes for wall plates, surface mount speakers, and wall mounted screen casings is during the: a) -Ordering b) -Installation c) -Site survey d) -Contract award - CORRECT ANSWER Site survey 3. While surveying a conference room for a system upgrade, an engineer measures 55 dB SPL A-wtd of ambient noise when the room is empty. How should they proceed? a) -Add voice lift to the system proposal b) -Add more loudspeakers to the system proposal c) -Speak with the client about getting more information on how to address the noise source d) -Do nothing, this level of ambient noise is well within system tolerance - CORRECT ANSWER Speak with the client about getting more information on how to address the noise source 4. A client needs to add videoconferencing functionality for high-level, private meetings. Which of following planned space types should you advise be ruled out? a) -Divisible room b) -Boardroom c) -Conference room d) -Classroom - CORRECT ANSWER Divisible room 5. Which phase of an AV project comes immediately AFTER the Program Phase? a) -The Design Phase b) -Project Planning and Coordination Phase c) -The Verification Phase d) -The Documentation Phase - CORRECT ANSWER The Design Phase 6. Which is NOT presented in the program report: a) -Executive Summary b) -Detailed list of equipment c) -Budgets d) -Infrastructure Considerations - CORRECT ANSWER Detailed list of equipment 7. When preparing an executive summary what should be included for submittal to the client? a) -A deep dive, including full technical specficiation, of all equipment to be used in the design. b) -An estimation of how many change orders might be required if the client doesn't use your design. c) -References to new and emerging technologies that should be considered for future spaces. d) -An overview of the programming process including who was surveyed during the process. - CORRECT ANSWER An overview of the programming process including who was surveyed during the process. 8. Which system is used to show colors from a video display? a) -Additive color system b) -Subtractive color system c) -Plus/minus color system d) -Recover color system - CORRECT ANSWER Additive color system 9. An installed audio system should be AT LEAST __________ above the ambient noise floor. a) -5 dB b) -25 dB c) -45 dB d) -75 dB - CORRECT ANSWER 25 db 10. A device is controlled using the pictured cable. What is the MOST LIKELY method of controlling this device? a) -IR b) -RF c) -RS-232 d) -Network - CORRECT ANSWER RS-232