TPC 108 POWERTOOLS LATEST
EXAM QUESTIONS AND
ANSWERS 2026 - 2027
To put a screwdriver tip back in shape, first grind the tip to a _______°
angle to the shank. - ANSWERS-90 degree
The rip blade has - ANSWERS-chisel shape for rapid cutting making
splinters
The size of a circular saw equals the - ANSWERS-Diameter
The finer the grain on a grinder wheel, the - ANSWERS-More cutting
edges on the wheel and the faster it cuts
The maximum safe speed for a grinding wheel with silicate bond is -
ANSWERS-6500 sfm
A light-duty power nibbler has a cutting speed of ________ fpm. -
ANSWERS-6
Do NOT use a pad sander for - ANSWERS-removal of Paint and
Varnish
END OF
PAGE 1
, TPC 108 POWERTOOLS LATEST
EXAM QUESTIONS AND
ANSWERS 2026 - 2027
Open-coat 16-24-30 sanding disks are best for - ANSWERS-To remove
paint and smooth surface irregularities
When using a pad sander, which is the best abrasive paper to use for
general-purpose sanding? - ANSWERS-open coat aluminum oxide
Advancing a router too fast causes - ANSWERS-force feeding- gauges
and splinters
What are the three factors that determine the proper rate of feed when
using a router? - ANSWERS-Texture, Size of the bit, Depth of cut
When using a saber saw, how can you avoid splintering the good side of
the work? - ANSWERS-avoid vibration press down and forward
When running a disk sander let _____ of the pad touch the work. -
ANSWERS-1/4 to 1/3
Most moisture is removed from a pneumatic tool's air supply at the -
ANSWERS-compressor
END OF
PAGE 2
EXAM QUESTIONS AND
ANSWERS 2026 - 2027
To put a screwdriver tip back in shape, first grind the tip to a _______°
angle to the shank. - ANSWERS-90 degree
The rip blade has - ANSWERS-chisel shape for rapid cutting making
splinters
The size of a circular saw equals the - ANSWERS-Diameter
The finer the grain on a grinder wheel, the - ANSWERS-More cutting
edges on the wheel and the faster it cuts
The maximum safe speed for a grinding wheel with silicate bond is -
ANSWERS-6500 sfm
A light-duty power nibbler has a cutting speed of ________ fpm. -
ANSWERS-6
Do NOT use a pad sander for - ANSWERS-removal of Paint and
Varnish
END OF
PAGE 1
, TPC 108 POWERTOOLS LATEST
EXAM QUESTIONS AND
ANSWERS 2026 - 2027
Open-coat 16-24-30 sanding disks are best for - ANSWERS-To remove
paint and smooth surface irregularities
When using a pad sander, which is the best abrasive paper to use for
general-purpose sanding? - ANSWERS-open coat aluminum oxide
Advancing a router too fast causes - ANSWERS-force feeding- gauges
and splinters
What are the three factors that determine the proper rate of feed when
using a router? - ANSWERS-Texture, Size of the bit, Depth of cut
When using a saber saw, how can you avoid splintering the good side of
the work? - ANSWERS-avoid vibration press down and forward
When running a disk sander let _____ of the pad touch the work. -
ANSWERS-1/4 to 1/3
Most moisture is removed from a pneumatic tool's air supply at the -
ANSWERS-compressor
END OF
PAGE 2
