NRCMA Practice Exam 03
100 multiple-choice practice questions • Correct answers highlighted in green
Instructions: Select the single best answer. Review the green answer strip and rationale beneath each question.
Clinical Procedures
1. Which device measures body temperature?
A. Thermometer
B. Stethoscope
C. Otoscope
D. Sphygmomanometer
Correct answer: A. Thermometer
A thermometer measures temperature.
2. Before using equipment, staff should confirm it is:
A. Clean, functional, and appropriate for the task
B. The newest-looking model only
C. Owned by another patient
D. Not in need of inspection
Correct answer: A. Clean, functional, and appropriate for the task
Equipment checks reduce preventable errors.
3. A patient reports dizziness during a procedure. The assistant should:
A. Pause, protect the patient, assess, and alert clinical staff
B. Tell the patient to ignore it
C. Continue without checking
D. Ask them to leave alone
Correct answer: A. Pause, protect the patient, assess, and alert clinical staff
New symptoms require attention and possible escalation.
4. A good way to confirm identity is to use:
A. Two approved identifiers
B. Room number alone
C. A visitor’s guess
D. Appearance alone
Correct answer: A. Two approved identifiers
Two identifiers help prevent wrong-patient errors.
5. Before a procedure, the assistant should first:
A. Verify the patient and explain the procedure
B. Skip identity checks
C. Use another patient’s chart
D. Begin without preparation
Correct answer: A. Verify the patient and explain the procedure
Identity checks and explanation support safe care.
6. For a routine blood pressure reading, the patient should ideally be:
A. Seated with back supported, feet flat, arm at heart level
B. Standing with arm overhead
C. Seated with legs crossed and arm unsupported
D. Lying with arm hanging down
Correct answer: A. Seated with back supported, feet flat, arm at heart level
Correct positioning improves measurement accuracy.
NRCMA Original Practice Material Page 1
, 7. A patient becomes faint during a blood draw. The assistant should:
A. Stop, protect the patient, and summon help as needed
B. Continue filling tubes
C. Ask the patient to stand
D. Leave the patient alone
Correct answer: A. Stop, protect the patient, and summon help as needed
Patient safety takes priority.
8. A pulse oximeter estimates:
A. Peripheral oxygen saturation
B. Blood glucose
C. Body mass index
D. Urine concentration
Correct answer: A. Peripheral oxygen saturation
Pulse oximetry estimates oxygen saturation.
9. When documenting vital signs, staff should:
A. Record measured values promptly and accurately
B. Copy the previous visit’s values
C. Round values to normal ranges
D. Wait until the end of the week
Correct answer: A. Record measured values promptly and accurately
Accurate, timely documentation supports care.
10. If a reading seems inconsistent, the assistant should:
A. Recheck using correct technique and report concerns
B. Guess a more likely value
C. Ignore it
D. Use another patient’s reading
Correct answer: A. Recheck using correct technique and report concerns
Unexpected measurements should be verified.
Phlebotomy & Specimens
11. To reduce hemolysis, the collector should:
A. Use appropriate equipment and avoid forceful transfer or shaking
B. Shake tubes vigorously
C. Force blood through the needle
D. Use any equipment regardless of size
Correct answer: A. Use appropriate equipment and avoid forceful transfer or shaking
Proper collection and handling reduce hemolysis.
12. After using a single-use needle, staff should:
A. Activate safety feature and discard in sharps container
B. Recap with both hands
C. Leave it on the tray
D. Carry it to another room
Correct answer: A. Activate safety feature and discard in sharps container
Dispose of sharps promptly without recapping.
13. Specimen transport requirements matter because:
A. Delays or wrong temperatures can affect integrity
B. All specimens are stable forever
C. They change the patient’s name
D. They eliminate quality control
Correct answer: A. Delays or wrong temperatures can affect integrity
Stability requirements depend on the test.
14. If patient identifiers conflict, the collector should:
A. Stop and resolve the discrepancy before collecting
B. Choose the most likely name
C. Collect and fix later
D. Use the room number
Correct answer: A. Stop and resolve the discrepancy before collecting
Identity discrepancies must be resolved first.
NRCMA Original Practice Material Page 2
100 multiple-choice practice questions • Correct answers highlighted in green
Instructions: Select the single best answer. Review the green answer strip and rationale beneath each question.
Clinical Procedures
1. Which device measures body temperature?
A. Thermometer
B. Stethoscope
C. Otoscope
D. Sphygmomanometer
Correct answer: A. Thermometer
A thermometer measures temperature.
2. Before using equipment, staff should confirm it is:
A. Clean, functional, and appropriate for the task
B. The newest-looking model only
C. Owned by another patient
D. Not in need of inspection
Correct answer: A. Clean, functional, and appropriate for the task
Equipment checks reduce preventable errors.
3. A patient reports dizziness during a procedure. The assistant should:
A. Pause, protect the patient, assess, and alert clinical staff
B. Tell the patient to ignore it
C. Continue without checking
D. Ask them to leave alone
Correct answer: A. Pause, protect the patient, assess, and alert clinical staff
New symptoms require attention and possible escalation.
4. A good way to confirm identity is to use:
A. Two approved identifiers
B. Room number alone
C. A visitor’s guess
D. Appearance alone
Correct answer: A. Two approved identifiers
Two identifiers help prevent wrong-patient errors.
5. Before a procedure, the assistant should first:
A. Verify the patient and explain the procedure
B. Skip identity checks
C. Use another patient’s chart
D. Begin without preparation
Correct answer: A. Verify the patient and explain the procedure
Identity checks and explanation support safe care.
6. For a routine blood pressure reading, the patient should ideally be:
A. Seated with back supported, feet flat, arm at heart level
B. Standing with arm overhead
C. Seated with legs crossed and arm unsupported
D. Lying with arm hanging down
Correct answer: A. Seated with back supported, feet flat, arm at heart level
Correct positioning improves measurement accuracy.
NRCMA Original Practice Material Page 1
, 7. A patient becomes faint during a blood draw. The assistant should:
A. Stop, protect the patient, and summon help as needed
B. Continue filling tubes
C. Ask the patient to stand
D. Leave the patient alone
Correct answer: A. Stop, protect the patient, and summon help as needed
Patient safety takes priority.
8. A pulse oximeter estimates:
A. Peripheral oxygen saturation
B. Blood glucose
C. Body mass index
D. Urine concentration
Correct answer: A. Peripheral oxygen saturation
Pulse oximetry estimates oxygen saturation.
9. When documenting vital signs, staff should:
A. Record measured values promptly and accurately
B. Copy the previous visit’s values
C. Round values to normal ranges
D. Wait until the end of the week
Correct answer: A. Record measured values promptly and accurately
Accurate, timely documentation supports care.
10. If a reading seems inconsistent, the assistant should:
A. Recheck using correct technique and report concerns
B. Guess a more likely value
C. Ignore it
D. Use another patient’s reading
Correct answer: A. Recheck using correct technique and report concerns
Unexpected measurements should be verified.
Phlebotomy & Specimens
11. To reduce hemolysis, the collector should:
A. Use appropriate equipment and avoid forceful transfer or shaking
B. Shake tubes vigorously
C. Force blood through the needle
D. Use any equipment regardless of size
Correct answer: A. Use appropriate equipment and avoid forceful transfer or shaking
Proper collection and handling reduce hemolysis.
12. After using a single-use needle, staff should:
A. Activate safety feature and discard in sharps container
B. Recap with both hands
C. Leave it on the tray
D. Carry it to another room
Correct answer: A. Activate safety feature and discard in sharps container
Dispose of sharps promptly without recapping.
13. Specimen transport requirements matter because:
A. Delays or wrong temperatures can affect integrity
B. All specimens are stable forever
C. They change the patient’s name
D. They eliminate quality control
Correct answer: A. Delays or wrong temperatures can affect integrity
Stability requirements depend on the test.
14. If patient identifiers conflict, the collector should:
A. Stop and resolve the discrepancy before collecting
B. Choose the most likely name
C. Collect and fix later
D. Use the room number
Correct answer: A. Stop and resolve the discrepancy before collecting
Identity discrepancies must be resolved first.
NRCMA Original Practice Material Page 2
