GEORGIA ELECTRICAL CONTRACTOR CLASS II (UNRESTRICTED) EXAMINATION– QUESTIONS AND ANSWERS |
VERIFIED AND WELL DETAILED ANSWERS | PLUS RATIONALES | DOWNLOAD AND PASS | LATEST EXAM UPDATE
2026/2027
Core Domains
Georgia Licensing Law and Board Rules
National Electrical Code Navigation and Application
Service, Feeder, and Branch Circuit Calculations
Grounding, Bonding, and Overcurrent Protection
Raceways, Boxes, and Wiring Methods
Motors, Generators, and Special Equipment
Commercial and Industrial Electrical Systems
Safety, OSHA Compliance, and Professional Standards
Introduction
This examination assesses candidates for the Georgia Electrical Contractor Class II (Unrestricted) license, evaluating the
knowledge and skills required to perform electrical contracting work without voltage or amperage limitations. The test
measures competency in code compliance, load calculations, grounding and bonding, wiring methods, motors, special
,occupancies, and Georgia-specific licensing regulations. Questions include both theoretical principles and scenario-
based applications requiring critical thinking and practical decision-making. Candidates must demonstrate mastery of
the National Electrical Code, OSHA safety standards, and Georgia Board rules to ensure public safety and professional
accountability. This comprehensive assessment prepares licensees for real-world electrical contracting challenges in
residential, commercial, and industrial environments.
Section One: Questions 1–50
Question 1
What is the primary purpose of the National Electrical Code?
A. To establish minimum safety requirements for electrical installations
B. To guarantee lowest installation cost
C. To regulate contractor profit margins
D. To replace all local building codes
🟢 Correct Answer: A. To establish minimum safety requirements for electrical installations
🔴 Explanation: The NEC provides minimum requirements for safe electrical design, installation, and inspection to
protect people and property from electrical hazards .
Question 2
,A Class II Georgia electrical contractor is authorized to perform work in which of the following scopes?
A. Single-phase systems under 200 amperes only
B. Unlimited voltage and amperage electrical contracting
C. Low-voltage systems only
D. Residential wiring only
🟢 Correct Answer: B. Unlimited voltage and amperage electrical contracting
🔴 Explanation: The Class II license is unrestricted regarding voltage and amperage, allowing work beyond the
limitations of a Class I license .
Question 3
The National Electrical Code is revised and published every how many years?
A. 1 year
B. 2 years
C. 3 years
D. 5 years
🟢 Correct Answer: C. 3 years
, 🔴 Explanation: The NFPA publishes a new edition of the NEC every three years to incorporate updated safety
standards and technologies .
Question 4
What is the unit of measurement for electrical resistance?
A. Volt
B. Ampere
C. Ohm
D. Watt
🟢 Correct Answer: C. Ohm
🔴 Explanation: Resistance to electrical current is measured in ohms (Ω), representing the opposition to current flow
in a circuit .
Question 5
Ohm's Law states that voltage equals:
A. Current divided by resistance
B. Current multiplied by resistance
VERIFIED AND WELL DETAILED ANSWERS | PLUS RATIONALES | DOWNLOAD AND PASS | LATEST EXAM UPDATE
2026/2027
Core Domains
Georgia Licensing Law and Board Rules
National Electrical Code Navigation and Application
Service, Feeder, and Branch Circuit Calculations
Grounding, Bonding, and Overcurrent Protection
Raceways, Boxes, and Wiring Methods
Motors, Generators, and Special Equipment
Commercial and Industrial Electrical Systems
Safety, OSHA Compliance, and Professional Standards
Introduction
This examination assesses candidates for the Georgia Electrical Contractor Class II (Unrestricted) license, evaluating the
knowledge and skills required to perform electrical contracting work without voltage or amperage limitations. The test
measures competency in code compliance, load calculations, grounding and bonding, wiring methods, motors, special
,occupancies, and Georgia-specific licensing regulations. Questions include both theoretical principles and scenario-
based applications requiring critical thinking and practical decision-making. Candidates must demonstrate mastery of
the National Electrical Code, OSHA safety standards, and Georgia Board rules to ensure public safety and professional
accountability. This comprehensive assessment prepares licensees for real-world electrical contracting challenges in
residential, commercial, and industrial environments.
Section One: Questions 1–50
Question 1
What is the primary purpose of the National Electrical Code?
A. To establish minimum safety requirements for electrical installations
B. To guarantee lowest installation cost
C. To regulate contractor profit margins
D. To replace all local building codes
🟢 Correct Answer: A. To establish minimum safety requirements for electrical installations
🔴 Explanation: The NEC provides minimum requirements for safe electrical design, installation, and inspection to
protect people and property from electrical hazards .
Question 2
,A Class II Georgia electrical contractor is authorized to perform work in which of the following scopes?
A. Single-phase systems under 200 amperes only
B. Unlimited voltage and amperage electrical contracting
C. Low-voltage systems only
D. Residential wiring only
🟢 Correct Answer: B. Unlimited voltage and amperage electrical contracting
🔴 Explanation: The Class II license is unrestricted regarding voltage and amperage, allowing work beyond the
limitations of a Class I license .
Question 3
The National Electrical Code is revised and published every how many years?
A. 1 year
B. 2 years
C. 3 years
D. 5 years
🟢 Correct Answer: C. 3 years
, 🔴 Explanation: The NFPA publishes a new edition of the NEC every three years to incorporate updated safety
standards and technologies .
Question 4
What is the unit of measurement for electrical resistance?
A. Volt
B. Ampere
C. Ohm
D. Watt
🟢 Correct Answer: C. Ohm
🔴 Explanation: Resistance to electrical current is measured in ohms (Ω), representing the opposition to current flow
in a circuit .
Question 5
Ohm's Law states that voltage equals:
A. Current divided by resistance
B. Current multiplied by resistance
