LADWP METER READER EXAM — CLASS 1611 BUNDLE– QUESTIONS AND ANSWERS | VERIFIED AND WELL
DETAILED ANSWERS | PLUS RATIONALES | DOWNLOAD AND PASS | LATEST EXAM UPDATE 2026/2027
Core Domains
Meter Reading Fundamentals
Consumption Calculation and Billing Units
Field Safety and Hazard Recognition
Customer Interaction and Professional Ethics
Route Management and Data Recording
Access Procedures and Regulatory Compliance
Equipment Identification and Inspection
Introduction
This examination assesses the knowledge, skills, and abilities required for the Meter Reader classification. Candidates
must demonstrate competency in accurately reading electric and water meters, calculating consumption in appropriate
billing units, identifying and reporting field irregularities, and maintaining safety in diverse outdoor conditions. The
exam emphasizes real-world application and sound decision-making through multiple-choice and scenario-based
questions. Mastery of these domains ensures that meter readers can perform their duties with accuracy,
professionalism, and strict adherence to established procedures and safety standards.
SECTION ONE — QUESTIONS 1–50
,Question 1
What is the primary purpose of a utility meter?
A. To regulate customer water pressure
B. To control utility rates
C. To measure the amount of utility consumed
D. To determine property ownership
🟢 Correct Answer: C. To measure the amount of utility consumed
🔴 Explanation: A utility meter records consumption so the amount of water or electricity used can be determined
for billing and operational purposes.
Question 2
LADWP Class 1611 is associated with which position?
A. Customer Service Representative
B. Utility Mechanic
C. Field Engineering Aide
D. Meter Reader
,🟢 Correct Answer: D. Meter Reader
🔴 Explanation: LADWP identifies Meter Reader as Class 1611 in its service and maintenance job classifications.
Question 3
What unit is commonly used by LADWP to measure water consumption?
A. Gallons per minute
B. Liters
C. Cubic feet
D. Pounds per square inch
🟢 Correct Answer: C. Cubic feet
🔴 Explanation: LADWP water meters measure the volume of water in cubic feet, where one cubic foot is
approximately 7.5 gallons.
Question 4
LADWP bases water charges on units of how many cubic feet?
A. 10 cubic feet
B. 50 cubic feet
, C. 100 cubic feet
D. 1,000 cubic feet
🟢 Correct Answer: C. 100 cubic feet
🔴 Explanation: LADWP states that water charges are based on units of 100 cubic feet, which is approximately 748
gallons.
Question 5
Approximately how many gallons are contained in 100 cubic feet of water?
A. 74.8 gallons
B. 374 gallons
C. 748 gallons
D. 7,480 gallons
🟢 Correct Answer: C. 748 gallons
🔴 Explanation: LADWP identifies 100 cubic feet as approximately 748 gallons.
Question 6
Before recording a meter reading, what should a meter reader verify?
DETAILED ANSWERS | PLUS RATIONALES | DOWNLOAD AND PASS | LATEST EXAM UPDATE 2026/2027
Core Domains
Meter Reading Fundamentals
Consumption Calculation and Billing Units
Field Safety and Hazard Recognition
Customer Interaction and Professional Ethics
Route Management and Data Recording
Access Procedures and Regulatory Compliance
Equipment Identification and Inspection
Introduction
This examination assesses the knowledge, skills, and abilities required for the Meter Reader classification. Candidates
must demonstrate competency in accurately reading electric and water meters, calculating consumption in appropriate
billing units, identifying and reporting field irregularities, and maintaining safety in diverse outdoor conditions. The
exam emphasizes real-world application and sound decision-making through multiple-choice and scenario-based
questions. Mastery of these domains ensures that meter readers can perform their duties with accuracy,
professionalism, and strict adherence to established procedures and safety standards.
SECTION ONE — QUESTIONS 1–50
,Question 1
What is the primary purpose of a utility meter?
A. To regulate customer water pressure
B. To control utility rates
C. To measure the amount of utility consumed
D. To determine property ownership
🟢 Correct Answer: C. To measure the amount of utility consumed
🔴 Explanation: A utility meter records consumption so the amount of water or electricity used can be determined
for billing and operational purposes.
Question 2
LADWP Class 1611 is associated with which position?
A. Customer Service Representative
B. Utility Mechanic
C. Field Engineering Aide
D. Meter Reader
,🟢 Correct Answer: D. Meter Reader
🔴 Explanation: LADWP identifies Meter Reader as Class 1611 in its service and maintenance job classifications.
Question 3
What unit is commonly used by LADWP to measure water consumption?
A. Gallons per minute
B. Liters
C. Cubic feet
D. Pounds per square inch
🟢 Correct Answer: C. Cubic feet
🔴 Explanation: LADWP water meters measure the volume of water in cubic feet, where one cubic foot is
approximately 7.5 gallons.
Question 4
LADWP bases water charges on units of how many cubic feet?
A. 10 cubic feet
B. 50 cubic feet
, C. 100 cubic feet
D. 1,000 cubic feet
🟢 Correct Answer: C. 100 cubic feet
🔴 Explanation: LADWP states that water charges are based on units of 100 cubic feet, which is approximately 748
gallons.
Question 5
Approximately how many gallons are contained in 100 cubic feet of water?
A. 74.8 gallons
B. 374 gallons
C. 748 gallons
D. 7,480 gallons
🟢 Correct Answer: C. 748 gallons
🔴 Explanation: LADWP identifies 100 cubic feet as approximately 748 gallons.
Question 6
Before recording a meter reading, what should a meter reader verify?
