Alabama Electrical Business & Law Exam
2026/2027 | ACTUAL-Style Practice Questions &
Answers, Electrical Contractor Licensing,
Construction Contracts, Estimating, Safety, and
Detailed Rationales
Question 1: According to the Alabama Board of Electrical Contractors
Administrative Code, what is the maximum amount of electrical
experience that may be substituted with approved education or
apprenticeship training toward the 8,000-hour requirement?
A. 500 hours
B. 1,000 hours
C. 1,500 hours
D. 2,000 hours
CORRECT ANSWER: D. 2,000 hours
Rationale: The Alabama Administrative Code 303-X-2-.01(6) states that an
applicant may substitute one year of approved electrical curriculum or
apprenticeship for 1,000 hours of experience, but a maximum of 2,000
hours of the total 8,000-hour requirement may be satisfied through
substitution.
Question 2: Under Alabama law, an electrical contractor license is
required for installation, construction, or maintenance of systems
operating at what voltage or higher?
A. 12 volts
B. 25 volts
C. 50 volts
D. 120 volts
CORRECT ANSWER: B. 25 volts
Rationale: Alabama Code § 34-36-13(a)(8) exempts from licensure "the
installation, construction, or maintenance of systems that operate on 25
volts or less." Therefore, systems operating above 25 volts require
licensure.
Question 3: When a licensed electrical contractor separates from a
business entity by termination or resignation, how many days does the
entity have to notify the Board?
,A. 3 days
B. 5 days
C. 10 days
D. 14 days
CORRECT ANSWER: B. 5 days
Rationale: The Administrative Code requires that in the event a licensed
electrical contractor in responsible charge separates from the business
entity, the contractor and entity shall notify the Board within five days by
submitting a severance notification form.
Question 4: What is the maximum civil penalty the Alabama Board of
Electrical Contractors may impose for a violation of the licensing
chapter?
A. $1,000
B. $2,500
C. $5,000
D. $10,000
CORRECT ANSWER: C. $5,000
Rationale: Alabama Code § 34-36-6(b) authorizes the Board to impose a
civil penalty in an amount not to exceed $5,000 upon proof of a violation of
the chapter.
Question 5: Which of the following is exempt from Alabama electrical
contractor licensing requirements?
A. A journeyman electrician employed by a licensed electrical contractor
B. An owner performing electrical work on premises he or she owns
C. A person installing electrical systems operating at 24 volts
D. All of the above
CORRECT ANSWER: D. All of the above
Rationale: Alabama Code § 34-36-13 exempts from licensure: journeyman
electricians employed by state licensees, owners performing work on their
own premises, and systems operating at 25 volts or less. All three listed
scenarios qualify for exemption.
Question 6: An electrical contractor license in Alabama is unlimited in
which of the following?
,A. Voltage and bid requirements
B. Number of employees
C. Geographic territory only
D. Types of buildings served
CORRECT ANSWER: A. Voltage and bid requirements
Rationale: The Administrative Code 303-X-2-.01(3) explicitly states that an
electrical contractor's license in Alabama is unlimited in voltage and bid
requirements.
Question 7: How many hours of experience must an applicant
document to qualify for a statewide electrical contractor license?
A. 4,000 hours
B. 6,000 hours
C. 8,000 hours
D. 10,000 hours
CORRECT ANSWER: C. 8,000 hours
Rationale: Administrative Code 303-X-2-.01(4) requires an applicant for a
statewide electrical contractor license to document a minimum of 8,000
hours of experience in the overall design, planning, layout, and direct
supervision of electrical construction activities.
Question 8: What is the passing score required for the Alabama
electrical contractor examination administered after January 1, 2010?
A. 65 percent
B. 70 percent
C. 75 percent
D. 80 percent
CORRECT ANSWER: C. 75 percent
Rationale: Alabama Code § 34-36-7(d) specifies that an individual who
successfully passed after January 1, 2010, must achieve a minimum score
of 75 percent on a nationally standardized proctored electrical
examination.
Question 9: If an electrical contractor license expires due to failure to
renew, within how many years may it be reinstated without retaking the
examination?
, A. 1 year
B. 2 years
C. 3 years
D. 5 years
CORRECT ANSWER: D. 5 years
Rationale: The Administrative Code 303-X-3-.08 provides that an expired
electrical contractor license may be reinstated within five years from the
date of expiration after application, payment of reinstatement and accrued
renewal fees, and satisfaction of continuing education requirements.
Question 10: What is the minimum height requirement for lettering
displaying the license number on a contractor's service vehicle?
A. 1 inch
B. 2 inches
C. 3 inches
D. 4 inches
CORRECT ANSWER: B. 2 inches
Rationale: Administrative Code 303-X-2 requires that the name and
Alabama license number displayed on service vehicles must have lettering
and numbers with a minimum height of two inches.
Question 11: Under Alabama's reciprocity agreements, which of the
following states does the Board currently recognize for reciprocal
licensure?
A. Florida
B. Georgia
C. Tennessee
D. Kentucky
CORRECT ANSWER: C. Tennessee
Rationale: The Board has reciprocity agreements with Mississippi,
Tennessee, North Carolina, South Carolina, Virginia, Ohio, Louisiana, and
Texas. Georgia reciprocity was discontinued.
Question 12: In the event of the death or incapacitation of a certified
contractor in responsible charge, how many days does the business
entity have to notify the Board in writing?
2026/2027 | ACTUAL-Style Practice Questions &
Answers, Electrical Contractor Licensing,
Construction Contracts, Estimating, Safety, and
Detailed Rationales
Question 1: According to the Alabama Board of Electrical Contractors
Administrative Code, what is the maximum amount of electrical
experience that may be substituted with approved education or
apprenticeship training toward the 8,000-hour requirement?
A. 500 hours
B. 1,000 hours
C. 1,500 hours
D. 2,000 hours
CORRECT ANSWER: D. 2,000 hours
Rationale: The Alabama Administrative Code 303-X-2-.01(6) states that an
applicant may substitute one year of approved electrical curriculum or
apprenticeship for 1,000 hours of experience, but a maximum of 2,000
hours of the total 8,000-hour requirement may be satisfied through
substitution.
Question 2: Under Alabama law, an electrical contractor license is
required for installation, construction, or maintenance of systems
operating at what voltage or higher?
A. 12 volts
B. 25 volts
C. 50 volts
D. 120 volts
CORRECT ANSWER: B. 25 volts
Rationale: Alabama Code § 34-36-13(a)(8) exempts from licensure "the
installation, construction, or maintenance of systems that operate on 25
volts or less." Therefore, systems operating above 25 volts require
licensure.
Question 3: When a licensed electrical contractor separates from a
business entity by termination or resignation, how many days does the
entity have to notify the Board?
,A. 3 days
B. 5 days
C. 10 days
D. 14 days
CORRECT ANSWER: B. 5 days
Rationale: The Administrative Code requires that in the event a licensed
electrical contractor in responsible charge separates from the business
entity, the contractor and entity shall notify the Board within five days by
submitting a severance notification form.
Question 4: What is the maximum civil penalty the Alabama Board of
Electrical Contractors may impose for a violation of the licensing
chapter?
A. $1,000
B. $2,500
C. $5,000
D. $10,000
CORRECT ANSWER: C. $5,000
Rationale: Alabama Code § 34-36-6(b) authorizes the Board to impose a
civil penalty in an amount not to exceed $5,000 upon proof of a violation of
the chapter.
Question 5: Which of the following is exempt from Alabama electrical
contractor licensing requirements?
A. A journeyman electrician employed by a licensed electrical contractor
B. An owner performing electrical work on premises he or she owns
C. A person installing electrical systems operating at 24 volts
D. All of the above
CORRECT ANSWER: D. All of the above
Rationale: Alabama Code § 34-36-13 exempts from licensure: journeyman
electricians employed by state licensees, owners performing work on their
own premises, and systems operating at 25 volts or less. All three listed
scenarios qualify for exemption.
Question 6: An electrical contractor license in Alabama is unlimited in
which of the following?
,A. Voltage and bid requirements
B. Number of employees
C. Geographic territory only
D. Types of buildings served
CORRECT ANSWER: A. Voltage and bid requirements
Rationale: The Administrative Code 303-X-2-.01(3) explicitly states that an
electrical contractor's license in Alabama is unlimited in voltage and bid
requirements.
Question 7: How many hours of experience must an applicant
document to qualify for a statewide electrical contractor license?
A. 4,000 hours
B. 6,000 hours
C. 8,000 hours
D. 10,000 hours
CORRECT ANSWER: C. 8,000 hours
Rationale: Administrative Code 303-X-2-.01(4) requires an applicant for a
statewide electrical contractor license to document a minimum of 8,000
hours of experience in the overall design, planning, layout, and direct
supervision of electrical construction activities.
Question 8: What is the passing score required for the Alabama
electrical contractor examination administered after January 1, 2010?
A. 65 percent
B. 70 percent
C. 75 percent
D. 80 percent
CORRECT ANSWER: C. 75 percent
Rationale: Alabama Code § 34-36-7(d) specifies that an individual who
successfully passed after January 1, 2010, must achieve a minimum score
of 75 percent on a nationally standardized proctored electrical
examination.
Question 9: If an electrical contractor license expires due to failure to
renew, within how many years may it be reinstated without retaking the
examination?
, A. 1 year
B. 2 years
C. 3 years
D. 5 years
CORRECT ANSWER: D. 5 years
Rationale: The Administrative Code 303-X-3-.08 provides that an expired
electrical contractor license may be reinstated within five years from the
date of expiration after application, payment of reinstatement and accrued
renewal fees, and satisfaction of continuing education requirements.
Question 10: What is the minimum height requirement for lettering
displaying the license number on a contractor's service vehicle?
A. 1 inch
B. 2 inches
C. 3 inches
D. 4 inches
CORRECT ANSWER: B. 2 inches
Rationale: Administrative Code 303-X-2 requires that the name and
Alabama license number displayed on service vehicles must have lettering
and numbers with a minimum height of two inches.
Question 11: Under Alabama's reciprocity agreements, which of the
following states does the Board currently recognize for reciprocal
licensure?
A. Florida
B. Georgia
C. Tennessee
D. Kentucky
CORRECT ANSWER: C. Tennessee
Rationale: The Board has reciprocity agreements with Mississippi,
Tennessee, North Carolina, South Carolina, Virginia, Ohio, Louisiana, and
Texas. Georgia reciprocity was discontinued.
Question 12: In the event of the death or incapacitation of a certified
contractor in responsible charge, how many days does the business
entity have to notify the Board in writing?
