ASNT Level III Visual Testing with all Correct & 100% Verified Answers |
Actual Complete Update |Already Graded A+
1. The visible light range is 380-770 nm
2. If 100 lumens of flux is measured at 10 inch- 11 lumens
es from a light source, how many would be
measured 30 inches from the light source?
3. Acetate film replicates surface features by: capillary action
4. A guided bend test of a weld would be Lack of fusion on the convex side of
re-jectable for the specimen
5. CCDs and orthicons are types of: image sensor
6. In a camera what two components perform lens and photocathode
the same functions as the cornea and retina
in the eye
7. In an equal leg fillet weld the actual distance from the root to
throat is the:
8. Reduced contrast from light reflected be- face screen reflections
tween the front of the tube and the
fluores-cent crystals on the screen is
termed:
9. In an unequal leg fillet weld the size is the: the product of the sides of the largest
right triangle that can be inscribed in the
fillet
10. Electron microscope resolution is: better than that obtained from a light mi-
croscope
, ASNT Level III Visual Testing with all Correct & 100% Verified Answers |
Actual Complete Update |Already Graded A+
11. Hydrogen fluoride, fluorosilic acid, hydro- etching
gen peroxide, and bromine are
hazardous materials used for:
, ASNT Level III Visual Testing with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
12. Cleavage fracture of a carbon steel the thinnest cross section
would likely occur at:
13. A creep failure would best be visually exam- = acetate film replication
ined by:
14. Beach marks and striations are features of: fatigue failures
15. to increase contrast of striations on a replica shadowing and/or vapor
deposition one would use:
16. which lens controls magnification of ocular, middle, objective
a borescope:
17. What is the effect of increasing field of view is decreased and/or depth of
magnifica-tion on a borescope: field is decreased
18. What aperture should be used to maximize the smallest
depth of field:
19. The characteristic of a 7X pocket short focal length (25mm), 20mm field of
magnifier are: view, and low resolution (10um)
20. The leg size of an equal leg fillet weld is nothing
equal to 0.7 times the:
21. Charge coupled devices convert light into: electrons
22. To increase the resolution of a use a camera with more lines
television system:
23. General material loss in a pump would corrosion
be caused by:
Actual Complete Update |Already Graded A+
1. The visible light range is 380-770 nm
2. If 100 lumens of flux is measured at 10 inch- 11 lumens
es from a light source, how many would be
measured 30 inches from the light source?
3. Acetate film replicates surface features by: capillary action
4. A guided bend test of a weld would be Lack of fusion on the convex side of
re-jectable for the specimen
5. CCDs and orthicons are types of: image sensor
6. In a camera what two components perform lens and photocathode
the same functions as the cornea and retina
in the eye
7. In an equal leg fillet weld the actual distance from the root to
throat is the:
8. Reduced contrast from light reflected be- face screen reflections
tween the front of the tube and the
fluores-cent crystals on the screen is
termed:
9. In an unequal leg fillet weld the size is the: the product of the sides of the largest
right triangle that can be inscribed in the
fillet
10. Electron microscope resolution is: better than that obtained from a light mi-
croscope
, ASNT Level III Visual Testing with all Correct & 100% Verified Answers |
Actual Complete Update |Already Graded A+
11. Hydrogen fluoride, fluorosilic acid, hydro- etching
gen peroxide, and bromine are
hazardous materials used for:
, ASNT Level III Visual Testing with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
12. Cleavage fracture of a carbon steel the thinnest cross section
would likely occur at:
13. A creep failure would best be visually exam- = acetate film replication
ined by:
14. Beach marks and striations are features of: fatigue failures
15. to increase contrast of striations on a replica shadowing and/or vapor
deposition one would use:
16. which lens controls magnification of ocular, middle, objective
a borescope:
17. What is the effect of increasing field of view is decreased and/or depth of
magnifica-tion on a borescope: field is decreased
18. What aperture should be used to maximize the smallest
depth of field:
19. The characteristic of a 7X pocket short focal length (25mm), 20mm field of
magnifier are: view, and low resolution (10um)
20. The leg size of an equal leg fillet weld is nothing
equal to 0.7 times the:
21. Charge coupled devices convert light into: electrons
22. To increase the resolution of a use a camera with more lines
television system:
23. General material loss in a pump would corrosion
be caused by:
