Mako Uni Comprehensive Resource To Help You Ace 2026-2027 Exams Includes
Frequently Tested Questions With Elaborated 100% Correct Complete Solutions
Guaranteed Pass First Attempt!! Current Update!!
The CT scan protocol for a Mako Partial Knee and a Mako
True
Total Knee is the same
On which page in the software should the procedure type
be changed (i.e., from a Patient Information
bicompartmental to a medial unicompartmental)?
In the implant planning page, a translational click moves
0.25mm
the components
In the implant planning page, a rotational click moves the
0.5 degrees
components
The surgeon can choose the preferred Partial Knee work-
flow (planar vs burr only) in True
"Surgeon Preferences"
It is required to capture all 8 CT landmarks to access the
True
implant planning software
1mm sagittal segmentation on the femur allows the sur-
geon to switch between ditterent True
procedures intraoperatively
On the implant planning page, when an implant is select-
True
ed, it will be visualized in green.
There are eight CT landmarks in Mako Partial Knee True
Medial uni, Lateral uni, Isolated PF, Medial Bicompart-
The available Mako Partial Knee procedures are...
mental. NOT LATERAL Bicompartmental
When defining the medial tibial posterior slope, it is rec- 1-2 degrees less than the anatomic slope but max of 7
ommended to be degrees
During implant planning, the medial tibial component
must be the largest size that fits True
without any A/P or M/L overhang
, Mako Uni Comprehensive Resource To Help You Ace 2026-2027 Exams Includes
Frequently Tested Questions With Elaborated 100% Correct Complete Solutions
Guaranteed Pass First Attempt!! Current Update!!
A left medial tibia can be used in a right lateral procedure
True
as well
In a medial bicompartmental procedure, the PF compo-
nent has a 1 up/1 down True
compatibility with the femoral component
The superior lateral tip of the PF component should be
bisected by the magenta line of True
the cortical bone
The medial and lateral transition zones should be 2mm proud of bone in the coronal plane
During an isolated PF procedure, the tibial array is not
True
required intraoperatively
If an isolated PF procedure is selected, the MPS is re-
True
quired to segment the tibia as well
In a medial bicompartmental procedure, if the PF compo-
nent is size 5, the femoral True
component can be size 6
The recommended planning parameters for varus/valgus
3 degrees of varus to 2 degrees of valgus
on a PF component
The lateral tibial component is generally 1-2 sizes smaller
than the medial tibial True
component due to the shape of the tibial anatomy
A lateral tibia requires a lot of internal rotation in order to
True
articulate with the femur
The size of the lateral femoral component is to a large
The Meniscal Notch
extent guided by
External rotation on the lateral femoral component can
help prevent overhang of its True
posterolateral aspect
Frequently Tested Questions With Elaborated 100% Correct Complete Solutions
Guaranteed Pass First Attempt!! Current Update!!
The CT scan protocol for a Mako Partial Knee and a Mako
True
Total Knee is the same
On which page in the software should the procedure type
be changed (i.e., from a Patient Information
bicompartmental to a medial unicompartmental)?
In the implant planning page, a translational click moves
0.25mm
the components
In the implant planning page, a rotational click moves the
0.5 degrees
components
The surgeon can choose the preferred Partial Knee work-
flow (planar vs burr only) in True
"Surgeon Preferences"
It is required to capture all 8 CT landmarks to access the
True
implant planning software
1mm sagittal segmentation on the femur allows the sur-
geon to switch between ditterent True
procedures intraoperatively
On the implant planning page, when an implant is select-
True
ed, it will be visualized in green.
There are eight CT landmarks in Mako Partial Knee True
Medial uni, Lateral uni, Isolated PF, Medial Bicompart-
The available Mako Partial Knee procedures are...
mental. NOT LATERAL Bicompartmental
When defining the medial tibial posterior slope, it is rec- 1-2 degrees less than the anatomic slope but max of 7
ommended to be degrees
During implant planning, the medial tibial component
must be the largest size that fits True
without any A/P or M/L overhang
, Mako Uni Comprehensive Resource To Help You Ace 2026-2027 Exams Includes
Frequently Tested Questions With Elaborated 100% Correct Complete Solutions
Guaranteed Pass First Attempt!! Current Update!!
A left medial tibia can be used in a right lateral procedure
True
as well
In a medial bicompartmental procedure, the PF compo-
nent has a 1 up/1 down True
compatibility with the femoral component
The superior lateral tip of the PF component should be
bisected by the magenta line of True
the cortical bone
The medial and lateral transition zones should be 2mm proud of bone in the coronal plane
During an isolated PF procedure, the tibial array is not
True
required intraoperatively
If an isolated PF procedure is selected, the MPS is re-
True
quired to segment the tibia as well
In a medial bicompartmental procedure, if the PF compo-
nent is size 5, the femoral True
component can be size 6
The recommended planning parameters for varus/valgus
3 degrees of varus to 2 degrees of valgus
on a PF component
The lateral tibial component is generally 1-2 sizes smaller
than the medial tibial True
component due to the shape of the tibial anatomy
A lateral tibia requires a lot of internal rotation in order to
True
articulate with the femur
The size of the lateral femoral component is to a large
The Meniscal Notch
extent guided by
External rotation on the lateral femoral component can
help prevent overhang of its True
posterolateral aspect
