NACE CIP 1 CBT (QUIZZES AND STUDY QUESTIONS)
UPDATED ACTUAL EXAM QUESTIONS AND CORRECT
ANSWERS
Question 1.
How is the process of steel corrosion ALWAYS described?
ANSWER
electrochemical
Question 2.
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used
effectively as galvanic anodes for carbon steel?
ANSWER
zinc, aluminum, magnesium
Question 3.
A decrease in temperature will generally cause the corrosion rate to _____
ANSWER
decrease
Question 4.
The electrolyte is a medium which carries the following type of current?
ANSWER
Ionic
Question 5.
Corrosion occurring uniformly across a surface is called _____
ANSWER
general corrosion
,Question 6.
When a conflict occurs on a coatings project, as the inspector, the preferred first course of action is to
_____
ANSWER
actively listen and endeavor to understand the positions of others
Question 7.
A proper coating specification should contain information regarding ____, ____, and ____
ANSWER
surface preparation standards, safety, and locations to be used
Question 8.
Is it ever okay to accept a gift from a contractor?
ANSWER
NO
Question 9.
What should you do if you find discrepancies between the specification and the coating manufacturer's
technical data sheet?
ANSWER
seek written clarification from the owner's representative
Question 10.
What are the general components of inspection reports?
ANSWER
- results of inspection tests
- location(s) of work
- details of preparation and application
,Question 11.
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___ ___ ___
ANSWER
- contractor's performance
- inspector's performance
- job progress
- work interruptions
Question 12.
As an inspector headed to the job site for the first time, where would you always find instruction
regarding appropriate types of PPE?
ANSWER
Safety Data Sheet (SDS), previously called MSDS
Question 13.
Materials inventory report should contain which of the following?
ANSWER
- quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
Question 14.
The primary function of the coating inspector is _____
ANSWER
specification compliance
Question 15.
High humidity in the air during coating application can cause _____
ANSWER
solvent entrapment
, Question 16.
The temperature at which moisture condenses on a surface is called _____
ANSWER
dew point
Question 17.
Where should the steel surface temperature reading be taken?
ANSWER
at the actual work location
Question 18.
What type of water should be added to a sling psychrometer?
ANSWER
distilled
Question 19.
Which type of coating is manufactured with the specific components added to slow down the activity of
the electrochemical cell?
ANSWER
inhibitive
Question 20.
Which coating component forms a stable film that retains its characteristic properties?
ANSWER
binder/resin
Question 21.
A barrier coating interrupts the ______ of the electrochemical cell.
ANSWER
electrolyte
UPDATED ACTUAL EXAM QUESTIONS AND CORRECT
ANSWERS
Question 1.
How is the process of steel corrosion ALWAYS described?
ANSWER
electrochemical
Question 2.
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used
effectively as galvanic anodes for carbon steel?
ANSWER
zinc, aluminum, magnesium
Question 3.
A decrease in temperature will generally cause the corrosion rate to _____
ANSWER
decrease
Question 4.
The electrolyte is a medium which carries the following type of current?
ANSWER
Ionic
Question 5.
Corrosion occurring uniformly across a surface is called _____
ANSWER
general corrosion
,Question 6.
When a conflict occurs on a coatings project, as the inspector, the preferred first course of action is to
_____
ANSWER
actively listen and endeavor to understand the positions of others
Question 7.
A proper coating specification should contain information regarding ____, ____, and ____
ANSWER
surface preparation standards, safety, and locations to be used
Question 8.
Is it ever okay to accept a gift from a contractor?
ANSWER
NO
Question 9.
What should you do if you find discrepancies between the specification and the coating manufacturer's
technical data sheet?
ANSWER
seek written clarification from the owner's representative
Question 10.
What are the general components of inspection reports?
ANSWER
- results of inspection tests
- location(s) of work
- details of preparation and application
,Question 11.
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___ ___ ___
ANSWER
- contractor's performance
- inspector's performance
- job progress
- work interruptions
Question 12.
As an inspector headed to the job site for the first time, where would you always find instruction
regarding appropriate types of PPE?
ANSWER
Safety Data Sheet (SDS), previously called MSDS
Question 13.
Materials inventory report should contain which of the following?
ANSWER
- quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
Question 14.
The primary function of the coating inspector is _____
ANSWER
specification compliance
Question 15.
High humidity in the air during coating application can cause _____
ANSWER
solvent entrapment
, Question 16.
The temperature at which moisture condenses on a surface is called _____
ANSWER
dew point
Question 17.
Where should the steel surface temperature reading be taken?
ANSWER
at the actual work location
Question 18.
What type of water should be added to a sling psychrometer?
ANSWER
distilled
Question 19.
Which type of coating is manufactured with the specific components added to slow down the activity of
the electrochemical cell?
ANSWER
inhibitive
Question 20.
Which coating component forms a stable film that retains its characteristic properties?
ANSWER
binder/resin
Question 21.
A barrier coating interrupts the ______ of the electrochemical cell.
ANSWER
electrolyte
