MSSC QUALITY PRACTICE TEST
EXPECTED QUESTIONS WITH VERIFIED ANSWERS
Question 1.
What are the two
ANSWER
types of assembly drawings? Exploded and basic
Question 2.
The three standard
ANSWER
views of an object are ____________ top, front, right side
Question 3.
Geometric dimensioning erances which control
ANSWER
and tolerances refers to tol- Form, profile, orientation, location, and runout
Question 4.
Which type of feature dimensioned?
ANSWER
is parallel to the surface being dimension lines
Question 5.
To establish on a drawing the designer would
ANSWER
that 1/8 inch equals 1 inch, 1/8 = 1 write ____________.
Question 6.
If the feature on the and the scale is 1:4, object?
ANSWER
drawing is drawn 2 inched long 8" what is the actual dimension of the
,Question 7.
If a box of parts weighs grams does it weigh?
ANSWER
30 pounds, how many kilo- 13.6 kilograms
Question 8.
The acronym, ECN,
ANSWER
stands for: Engineering Change Notice
Question 9.
A capable manufacturing
ANSWER
process tends to run out of control
Question 10.
The acronym, SPC,
ANSWER
stands for Statistical process control
Question 11.
Adjustments in follow-up are necessary in a/an
ANSWER
with product quality checks Product process and sys- _______ non-conformity tem
Question 12.
Recommendations sponsibility of
ANSWER
for corrective action are the re- All knowledgeable per- sons
, Question 13.
To convert inches
ANSWER
to millimeters, multiply inches by: 25.4
Question 14.
Identify a device that of 0.001 inch.
ANSWER
measures length to an accuracy Micrometer
Question 15.
A ________ is the total dimension is allowed
ANSWER
amount by which a specified tolerance to vary and still be a good part
Question 16.
Which of the following selected to measure tion of 1.625 inches
ANSWER
measurement tools should be micrometer a part that has a length specifica- +/- 0.005?
Question 17.
A part measures 45.70 ance of 46mm + or
ANSWER
mm in a process with the toler- Out of spec, below the
- .28 is considered ____________. lower tolerance limit
Question 18.
When connected to to:
ANSWER
a PC, a digital caliper can be used Collect SPC data
EXPECTED QUESTIONS WITH VERIFIED ANSWERS
Question 1.
What are the two
ANSWER
types of assembly drawings? Exploded and basic
Question 2.
The three standard
ANSWER
views of an object are ____________ top, front, right side
Question 3.
Geometric dimensioning erances which control
ANSWER
and tolerances refers to tol- Form, profile, orientation, location, and runout
Question 4.
Which type of feature dimensioned?
ANSWER
is parallel to the surface being dimension lines
Question 5.
To establish on a drawing the designer would
ANSWER
that 1/8 inch equals 1 inch, 1/8 = 1 write ____________.
Question 6.
If the feature on the and the scale is 1:4, object?
ANSWER
drawing is drawn 2 inched long 8" what is the actual dimension of the
,Question 7.
If a box of parts weighs grams does it weigh?
ANSWER
30 pounds, how many kilo- 13.6 kilograms
Question 8.
The acronym, ECN,
ANSWER
stands for: Engineering Change Notice
Question 9.
A capable manufacturing
ANSWER
process tends to run out of control
Question 10.
The acronym, SPC,
ANSWER
stands for Statistical process control
Question 11.
Adjustments in follow-up are necessary in a/an
ANSWER
with product quality checks Product process and sys- _______ non-conformity tem
Question 12.
Recommendations sponsibility of
ANSWER
for corrective action are the re- All knowledgeable per- sons
, Question 13.
To convert inches
ANSWER
to millimeters, multiply inches by: 25.4
Question 14.
Identify a device that of 0.001 inch.
ANSWER
measures length to an accuracy Micrometer
Question 15.
A ________ is the total dimension is allowed
ANSWER
amount by which a specified tolerance to vary and still be a good part
Question 16.
Which of the following selected to measure tion of 1.625 inches
ANSWER
measurement tools should be micrometer a part that has a length specifica- +/- 0.005?
Question 17.
A part measures 45.70 ance of 46mm + or
ANSWER
mm in a process with the toler- Out of spec, below the
- .28 is considered ____________. lower tolerance limit
Question 18.
When connected to to:
ANSWER
a PC, a digital caliper can be used Collect SPC data
