MSSC QUALITY POST TEST ANSWERS
FREQUENTLY TESTED ACTUAL EXAM QUESTIONS WITH
CORRECT ANSWERS
Question 1.
1. Inspection data effective manufacturing
ANSWER
requires for making Accurate data. decisions:
Question 2.
2. A feature of all tems is:
ANSWER
mistake-proofing sys- Automated inspection.
Question 3.
3. A manufacturer to handle nonconforming option to use a nonconforming is acceptable:
ANSWER
has several options Only if it does not affect performance or cause materials. The a safety
hazard. material
Question 4.
4. A process SOP should stated procedures conforming materials. is detected and there cedures, it is
the responsibility frontline worker to:
ANSWER
include clearly C. Refer the problem to a supervisor or responfor dealing with non- sible
department. If nonconformity are no written pro- of the
Question 5.
5. Third-party audits that a quality program A
ANSWER
provide evidence...C. Acquire or maintain certification. meets standards.
,Question 6.
6. An auditor bases on data collected
ANSWER
his/her audit report Directly observing the process. by: Interviewing workers and supervisors.
Examining production records.
Question 7.
7. Inspections can several purposes, continuous improvement. spections, workers
ANSWER
be carried out for Read production documents. including as a part of Use inspection and
analysis tools To perform in- Read safety and environmental standards. should know how to:
Question 8.
8. A possible source spection data is:
ANSWER
of inaccuracy in in- Human error.
Question 9.
9. Communication to inaccuracies and Detailed instructions results must be included
ANSWER
breakdowns can lead Inspection plan. poor decisions. for communicating in every:
Question 10.
10. The inspection en process depends tors. This frequency is specified
ANSWER
frequency for any giv- Sampling plan. on a number of fac- in a (n):
Question 11.
11. The main purpose final product is:
ANSWER
of inspecting the Product acceptance.
, Question 12.
12. Many products material's history. as the product's:
ANSWER
require, a record of a Traceability. This record is known
Question 13.
13. In some cases, are shipped to a customer tomer waives the specification. pens, workers should:
ANSWER
nonconforming goods Be aware that the shipment is an exception. if the cus- When this hap-
Question 14.
14. Many inspections frontline workers. systems require that
ANSWER
are performed by Provide training of proper procedures for test- Quality management ing.
the company: Include training in health, safety, and environmental procedures. Keep
complete documentation of all training.
Question 15.
15. The purpose of
ANSWER
a quality audit is to: Provide assurance that the process follows the guidelines of the quality
plan.
Question 16.
16. The three types
ANSWER
of quality audits are: Internal, external, and third-party.
Question 17.
17. An audit report to the person or organization the audit. A summary from standards should to:
ANSWER
is always presented Production workers involved in the process. requesting of each
discrepancy also be available
FREQUENTLY TESTED ACTUAL EXAM QUESTIONS WITH
CORRECT ANSWERS
Question 1.
1. Inspection data effective manufacturing
ANSWER
requires for making Accurate data. decisions:
Question 2.
2. A feature of all tems is:
ANSWER
mistake-proofing sys- Automated inspection.
Question 3.
3. A manufacturer to handle nonconforming option to use a nonconforming is acceptable:
ANSWER
has several options Only if it does not affect performance or cause materials. The a safety
hazard. material
Question 4.
4. A process SOP should stated procedures conforming materials. is detected and there cedures, it is
the responsibility frontline worker to:
ANSWER
include clearly C. Refer the problem to a supervisor or responfor dealing with non- sible
department. If nonconformity are no written pro- of the
Question 5.
5. Third-party audits that a quality program A
ANSWER
provide evidence...C. Acquire or maintain certification. meets standards.
,Question 6.
6. An auditor bases on data collected
ANSWER
his/her audit report Directly observing the process. by: Interviewing workers and supervisors.
Examining production records.
Question 7.
7. Inspections can several purposes, continuous improvement. spections, workers
ANSWER
be carried out for Read production documents. including as a part of Use inspection and
analysis tools To perform in- Read safety and environmental standards. should know how to:
Question 8.
8. A possible source spection data is:
ANSWER
of inaccuracy in in- Human error.
Question 9.
9. Communication to inaccuracies and Detailed instructions results must be included
ANSWER
breakdowns can lead Inspection plan. poor decisions. for communicating in every:
Question 10.
10. The inspection en process depends tors. This frequency is specified
ANSWER
frequency for any giv- Sampling plan. on a number of fac- in a (n):
Question 11.
11. The main purpose final product is:
ANSWER
of inspecting the Product acceptance.
, Question 12.
12. Many products material's history. as the product's:
ANSWER
require, a record of a Traceability. This record is known
Question 13.
13. In some cases, are shipped to a customer tomer waives the specification. pens, workers should:
ANSWER
nonconforming goods Be aware that the shipment is an exception. if the cus- When this hap-
Question 14.
14. Many inspections frontline workers. systems require that
ANSWER
are performed by Provide training of proper procedures for test- Quality management ing.
the company: Include training in health, safety, and environmental procedures. Keep
complete documentation of all training.
Question 15.
15. The purpose of
ANSWER
a quality audit is to: Provide assurance that the process follows the guidelines of the quality
plan.
Question 16.
16. The three types
ANSWER
of quality audits are: Internal, external, and third-party.
Question 17.
17. An audit report to the person or organization the audit. A summary from standards should to:
ANSWER
is always presented Production workers involved in the process. requesting of each
discrepancy also be available
