MSSC QUALITY 4.0
LATEST ACTUAL EXAM WITH VERIFIED QUESTIONS &
CORRECT ANSWERS
Question 1.
Question: Of the ling covers which
ANSWER
four roles of management, control- Monitoring actual to stanof the following actions: dard
work performance
Question 2.
Question: The performance by the customer is sure of __________.
ANSWER
of the product as viewed Product quality ultimately the most important mea-
Question 3.
Question: To reduce to shorten cycle time
ANSWER
variation, minimize defects, and Quality are considered __________ goals.
Question 4.
Question: Defect four types of quality
ANSWER
prevention is the __________ of the Most cost effective costs.
Question 5.
Question: A history satisfaction should
ANSWER
of dependability and customer Evaluating a potential be considered when __________. supplier
,Question 6.
Question: A worker worker notices a critical to product
ANSWER
should __________ any time the Notify the supervisor to minor quality problem that is not
determine the correct acfunction or performance. tion to take
Question 7.
Question: An employee visor if the following
ANSWER
should report to their super- There is an increase in the situation occurs: number of defective
parts produced by a machine.
Question 8.
Question: Everyone sible for __________
ANSWER
within an organization is respon- Improving quality.
Question 9.
Question: Greater when __________.
ANSWER
variations in a process may occur Unapproved process adjustments are performed
Question 10.
Question: Product form a(n) __________ design process.
ANSWER
development teams should per- Design Failure Mode and as early as possible during their
Effects Analysis
Question 11.
Question: To make notified, use a __________.
ANSWER
sure the appropriate parties are Predetermined distribution list
,Question 12.
Question: __________ proved to ensure
ANSWER
should be validated and ap- Standard operating proaccuracy. cedures
Question 13.
Question: First piece __________.
ANSWER
inspection is required for Documenting repeatable setups
Question 14.
Question: The number sure of __________.
ANSWER
of defects produced is a mea- The effectiveness of a quality assurance system
Question 15.
Question: The quality pany is going to reach the __________.
ANSWER
plan documents how the com- Quality management sysits quality goals in the scope of tem
Question 16.
Question: Companies baseline measurement performance.
ANSWER
often __________ to create a Establish a metric for improvements in machine
Question 17.
Question: 5S is a focuses on creating
ANSWER
lean manufacturing technique that Clean and orderly work a(n) __________. area
, Question 18.
Question: Companies procedures for continuous their __________.
ANSWER
typically include policies and Quality assurance system improvements as part of
Question 19.
Question: Joseph Phillip Crosby contributed of __________.
ANSWER
M. Juran, W. Edwards Deming, and C. TQM, Total Quality Manto the various approaches
agement
Question 20.
Question: Kaizen, many elements used
ANSWER
Kanban, and 5S are just a few of Just In Time (JIT) in a(n) __________ operation.
Question 21.
Question: The systematic that do not add value from customer order
ANSWER
way to eliminate activities Lean manufacturing to the product in all processes to delivery is
called __________.
Question 22.
Question: To identify added) activities __________.
ANSWER
and eliminate waste (non-value A continuous improve- proves a company is operating in ment
environment
Question 23.
Question: Spreadsheets tions in __________
ANSWER
are used to perform calcula- Rows and columns and produce graphs.
LATEST ACTUAL EXAM WITH VERIFIED QUESTIONS &
CORRECT ANSWERS
Question 1.
Question: Of the ling covers which
ANSWER
four roles of management, control- Monitoring actual to stanof the following actions: dard
work performance
Question 2.
Question: The performance by the customer is sure of __________.
ANSWER
of the product as viewed Product quality ultimately the most important mea-
Question 3.
Question: To reduce to shorten cycle time
ANSWER
variation, minimize defects, and Quality are considered __________ goals.
Question 4.
Question: Defect four types of quality
ANSWER
prevention is the __________ of the Most cost effective costs.
Question 5.
Question: A history satisfaction should
ANSWER
of dependability and customer Evaluating a potential be considered when __________. supplier
,Question 6.
Question: A worker worker notices a critical to product
ANSWER
should __________ any time the Notify the supervisor to minor quality problem that is not
determine the correct acfunction or performance. tion to take
Question 7.
Question: An employee visor if the following
ANSWER
should report to their super- There is an increase in the situation occurs: number of defective
parts produced by a machine.
Question 8.
Question: Everyone sible for __________
ANSWER
within an organization is respon- Improving quality.
Question 9.
Question: Greater when __________.
ANSWER
variations in a process may occur Unapproved process adjustments are performed
Question 10.
Question: Product form a(n) __________ design process.
ANSWER
development teams should per- Design Failure Mode and as early as possible during their
Effects Analysis
Question 11.
Question: To make notified, use a __________.
ANSWER
sure the appropriate parties are Predetermined distribution list
,Question 12.
Question: __________ proved to ensure
ANSWER
should be validated and ap- Standard operating proaccuracy. cedures
Question 13.
Question: First piece __________.
ANSWER
inspection is required for Documenting repeatable setups
Question 14.
Question: The number sure of __________.
ANSWER
of defects produced is a mea- The effectiveness of a quality assurance system
Question 15.
Question: The quality pany is going to reach the __________.
ANSWER
plan documents how the com- Quality management sysits quality goals in the scope of tem
Question 16.
Question: Companies baseline measurement performance.
ANSWER
often __________ to create a Establish a metric for improvements in machine
Question 17.
Question: 5S is a focuses on creating
ANSWER
lean manufacturing technique that Clean and orderly work a(n) __________. area
, Question 18.
Question: Companies procedures for continuous their __________.
ANSWER
typically include policies and Quality assurance system improvements as part of
Question 19.
Question: Joseph Phillip Crosby contributed of __________.
ANSWER
M. Juran, W. Edwards Deming, and C. TQM, Total Quality Manto the various approaches
agement
Question 20.
Question: Kaizen, many elements used
ANSWER
Kanban, and 5S are just a few of Just In Time (JIT) in a(n) __________ operation.
Question 21.
Question: The systematic that do not add value from customer order
ANSWER
way to eliminate activities Lean manufacturing to the product in all processes to delivery is
called __________.
Question 22.
Question: To identify added) activities __________.
ANSWER
and eliminate waste (non-value A continuous improve- proves a company is operating in ment
environment
Question 23.
Question: Spreadsheets tions in __________
ANSWER
are used to perform calcula- Rows and columns and produce graphs.
